OzVMX Forum
Marque Remarks => CZ => Topic started by: MauriceR on December 06, 2012, 12:39:11 pm
-
Is it the same ignition for the 380 and 250
-
PVL dont make cz ignitions
-
i got this on ebay and instructions list it as 250 cz, if not cz any idea what it is for
http://www.ebay.com/itm/390505003966?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648
-
It looks like a PVL but for a couple of differences like using Torx bolts instead of normal allen heads. You'd have thought he's show the whole instruction manual and state the maker. He wants you to think it's a PVL. Still for $200 its worth finding out.
-
Not sure if it's a PVL ignition, should fit as this seller seems to sell quite a few cz parts.
I wouldn't fit it to your 380 due to it being an internal rotor type which will lead to wheelspin
-
its definately a pvl as it is stamped pvl on the parts, i already bought it as $200 was too hard to pass on, penton website doesn't list it though for a cz that's why i was inquiring
Maurice
-
http://www.crhighperformance.com/view/index.php?photo=P1000001.JPG
cz cdi
-
not sure if this is relevant, but for the yamahas they are all the same except you use differant spacers ( there are 2 verison) that lift the stator plate into align with the rotor. All PVL analouge use the same black bock and ign. so the only thing that changes is the rotor or more so its taper. basical if it fits under the cover and you can find or cut the right taper PVl will fit anything even twin sparks.
-
but not czs
rotor on inside stator plate on outside
-
On all my five race CZ run with the small button internal rotor Motoplat setup
The PVL that you brought with the seal in the stator plate look like a twinpipe model maybe
The Photo show the stator mounts inside out which was rare on the old MX bikes
(http://i48.tinypic.com/xkvbs4.jpg)
(http://i47.tinypic.com/243jkw4.jpg)
See what turns up in the post good luck as the price was right ;D
Cheers
-
They made a rare DKW twin race ignition for me last year
Looks like a CZ unit is now listed for the MX models
http://www.powerdynamo.biz
-
would recommend electrexworld ignitions ;) ;), run on my red frame 400 and 400 falta simple to fit either twin plug (stk 952) or single plug (stk 950) ignitions.
you will need to purchase the electrexworld puller for these ignitions, as the thread is different on the cz flywheel.
best service out of the uk parts sent by courier.
web site electrexworld.co.uk
petard
-
Thumbs up for Electrix from UK, price was well below others, turned up in 5 day from UK, was supplied with the puller, very nicely made, directions were clear and spot on, the old 450 Husky started first kick and is surprisingly easy to start -- it seems the electronic box retards the ignition at starting revs so less chance of nasty 450 kickback/liftoff ::)
-
VMX60 thanks for the link to powerdynamo as the box actually has a german shipping label on it, they mave have made it so i sen an inquiry to them,
hopefully they can identify.
Maurice
-
Maurice
Hope your lucky if its a Powerdynamo they are just a SUPERB German Engineering product
My DKW twin 1957 race Igintion turn up as a straight bolt up as they had the pattern ;D
Cheers
-
Maurice,
Do you have a result as yet with this ignition. I have a 1973 250 that is going back together now and will need an ignition system. Thinking of going to Les at VMX Unlimited.
Pete
-
I could never get a definite answer from anyone. Every supplier I contacted either said it wasn't theirs or didn't bother responding.
The guy I bought it from on ebay says it is a cz ignition but I never even tried fitting it as I have 380 and sounds like it is different between 250/380.
Long story short it got thrown in a corner on the bench until i decide what to do with it.
Maurice
-
Maurice
Post some clear Photos of CZ igntion on this forum sure is a lot of Guys that might be able to ID what model bike its made for :-\ :-\
Cheers
-
Filed a complaint with ebay and they sided with me so I sent it back to the seller and got a refund, seller kept saying he would trade for other parts or get me another ignition but he never followed through on his promises