OzVMX Forum

Marketplace => Wanted => Topic started by: Mick22 on April 19, 2008, 07:34:58 pm

Title: CR250m Parts
Post by: Mick22 on April 19, 2008, 07:34:58 pm
Just bought a CR250M in boxes with the old guanantee "shes all there mate"....... not that I beleived it!!

Couple of bits I need

Chain guide
Front number plate

But most of all I need the small bracket that bolts to the side of the Barrel that holds the end of the clutch cable, hoping someone can help because its the sort of part no one will ever bother putting on ebay!

Cheers

Mick
Title: Re: CR250m Parts
Post by: Hoony on April 19, 2008, 08:06:05 pm
you may be surprised it is probably still available from honda.
Title: Re: CR250m Parts
Post by: Mick22 on April 20, 2008, 11:51:09 am
Tried Honda OZ and US but no luck, for some reason there is no part number for it... its shown on the fische on the cylinder page as item 3, but there is no part number next to item 3 ????

I've made one for now but want the factory one so it looks right :)
Title: Re: CR250m Parts
Post by: Noel on April 20, 2008, 12:04:48 pm
Hi mick,
I may have one from an MT250 if thats any help,
cheers
Noel
Title: Re: CR250m Parts
Post by: cyclegod on April 20, 2008, 12:19:11 pm
Here's what you need.....
and it has the cable retainer included  ;D ;D ;D
http://cgi.ebay.com/ebaymotors/1973-1974-Honda-Elsinore-CR250-clutch-extender-kit-NEW_W0QQcmdZViewItemQQcategoryZ34284QQihZ018QQitemZ280219341114QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/1973-1974-Honda-CR250-Elsinore-aftermarket-chain-guide_W0QQcmdZViewItemQQcategoryZ34284QQihZ018QQitemZ280218511201QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/73-74-Honda-CR250-Elsinore-Billet-Rear-Brake-Lever_W0QQcmdZViewItemQQcategoryZ35580QQihZ004QQitemZ140188905091QQrdZ1QQsspagenameZWDVW

This guy is ALWAYS listing a silver front number plate
http://motors.search.ebay.com/_W0QQsassZbcr03
Title: Re: CR250m Parts
Post by: Quicksilver on April 20, 2008, 01:42:57 pm
I assume its this one your after.

http://cgi.ebay.com/ebaymotors/nos-honda-cr250-cr250m-elsinore-chain-guide_W0QQcmdZViewItemQQcategoryZ10066QQihZ012QQitemZ220225984727QQrdZ1QQsspagenameZWDVW
Title: Re: CR250m Parts
Post by: Mick22 on April 20, 2008, 09:36:51 pm
Thanks for the info guys, very helpful!!

Thanks for the offer Noel :) but I think I mite buy one of those trick looking thinga-majigs.

Cyclegod you should be asking them for a commision..... I couldn't help myself, my clutch bracket is going to end up costing me about$400.... but at least I've got lots of shiny new bits :) :)


Title: Re: CR250m Parts
Post by: jimg1au on April 20, 2008, 09:43:18 pm
noel
i sent you a pm about the chain guide
cheers
jim
Title: Re: CR250m Parts
Post by: dkupf on April 21, 2008, 08:04:57 pm
If the chain guide is the same as what is on the Cr125m2. I have one you can have. Darcy #674
Title: Re: CR250m Parts
Post by: jimg1au on April 22, 2008, 12:20:01 am
only the rollers are the same part no the guide itself is a different no
thanks
jimg