OzVMX Forum
Marketplace => For Sale => Topic started by: suzuki27 on April 19, 2008, 07:03:21 pm
-
Just an idea!-But before CD5, Forum members/viewers etc -Could list a wish list for parts they are after.(Like Mark's Vintage Swapmeet in the US did recently) ALSO list parts they want to sell-of course the price could be listed OR made available to serious buyers only via message-it just might help some people prior to "Dealer" types buying up.Now,I'm no Commo but now is as good a time as any to delve into the shed and put it up-that is of course if you are not a certified,card carrying Hoarder.
-
Hey, good idea.
I've got big piles of DT175 bits (twin- and mono-shock), YZ125E frame and matching-number cases, some YZ125C bits, and some other shit that I can bring up and off-load at CD5.
(I'm still a certified hoarder though).
-
I'm a total hoarder..
so i have a wish instead..
Good luck and best wishes to the WA sidecar guys heading over to Naracourte for the Sidecar Spectatulor on Anzac weekend..
and best wishes for CD5.
-
Bloody good idea
My wanted wish list.
CR250m bits, like that a shock ;D ;D
XT500 seat,
Selling
TM75 to restore. $250. Things I know are wrong with it. Seat is not right. Kick starter sharft is stuffed. Some of chrome is poor. wheel bearings shot, Engine will run with a push but certainly need attention, carby work for sure.
(http://i266.photobucket.com/albums/ii279/Quicksilver_032/tm75.jpg)
(http://i266.photobucket.com/albums/ii279/Quicksilver_032/tm751.jpg)
-
Wish list (as a start)
'80 YZ50G exhaust and muffler
'80 YZ50G left hand footpeg mount and footpeg.
'80 YZ50G front and rear guards
'80 YZ50G shift shaft
'81 YZ 250H swingarm - if I can't get the issues sorted
'81 YZ 250H mudguard (the opaque part that goes over the airbox)
'81 YZ125H exhaust and muffler
'82 YZ125J bottom end
Not too much to ask for surely ::)
-
wish list
Rm 250 T air box
Rm 250 T crank cases
Rm 125 A-B-C seat
What the hell if its Suzuki I'll most probably buy it ;D
-
wish list
- front sprocket cover yz250h
any spares for a honda CR500RE :)
-
for sale
rm250 x head and barrel $40
xr75 k4 rear guard nos $60
xr 75 k4 r/h side cover used no tabs broken $40
xr 75 k4 50 mm vinola piston kit nos $150
dg suzuki tank decals suit steel tank rm 80 $50
dg 4 petal reed block suit pe 175n &t will also fit rm 125 n & t $100
and sorry cant send photos camera not working.
-
is that the same reed block you offered me dodgee?
if it is it doesnt fit PE 175 N (1979) 175 N engine is nothing like 175 T
it fits
Part # = 13150-40200
Part Description = VALVE ASSEMBLY,REED
PE175D
PE175E
PE175T
PE175X
PE175Z
RM100N
RM100T
RM100X
RM125-N
RM125-T
bargain price anyway. i wish it was the 6 petal one im trying to find
-
yes it is and thanks for that, wish it was a 6 petal.
dodgee
-
Quicky see private email (D*** etc) please re TM
-
I'll be bringing for sale a 1973 TM75. Just as ratty looking as that shown above. Kickstarts and runs but rattles. Seat has been recovered in a yuk green vinyl. Has been resprayed with a broom, probably by the same person who did Quicksilvers. Gears change OK, but had been sitting for years and the clutch is gummed up, haven't got time to strip & clean. Price negotiable, as came part of a batch purchase.
PE250 motor - crankcases, barrel,head, turns over, has mag cover but no electrics, clutch cage no plates. Engine no PE250-203314.
If anyone desires this I'll bring it down as well.
Montesa 250 Automix motor. 1975? Crinkle fin barrell & head. Cases seem ok, but flywheel has a crack. Sat around somewhere exposed for years, no electrics. Prices on these motors very negotiable, just taking up space at home.
Wish List:
VR-VB Montesa
Ossa Stiletto or Phantom
cheers, Mike
-
any rm 125a parts coming. hope so AND PE250B BITS.
-
Would appear I have traded a rough XL350 to Quicky for the little TM :) So Mike1948 please check your PMs
AND anybody from Vic going to CD5 willing to pick up one large bike from Elmore (3558) and bring back a little one. Of course I will raid the slim coffers for expenses help say $100?. Tim
-
Is their anyone can do this for us. We know its sort notice guys. Tim and I only just came to an agreement with this bike exchange yesterday. There is an offer of $100 worth of free fuel, beer, parts whatever you want to spend it on. Thats a mighty fine offer Tim has put forward surely worth the effort if you heading from Vic to CD-5 anyway.
-
I am i need of a rear wheel bearing retainer for a 1978 CR 250R if anyone has one for sale.
-
I'm chasing a top end or complete motor for 1986 YZ80 #1LR . thanks .
-
yzhilly, I have a rough 86 yz80 motor stuck, think gearbox? can bring to CD5 $150.
-
Yeah Snowy would need a good top end at that price and is it complete with stator coils
-
Complete bike, only missing LH number plate/side cover.
-
Could slip top end off and check.
-
Sold .see ya at CD5 . ok snowy ???
-
G'day fella's, i know i'm leaving this a bit late but here is my wish list;
* YZ 80H - Left hand sidecover,Top end or complete motor
* YZ 125C - Wheels,pipe any condition, gearshift shaft cover
* YZ 250L - power valve assembly
* YZ 465H - Clutch cover
* YZ 250F - chain roller
* CR 250RZ - Kickstart shaft and knuckle
* 83 CR 250/480 - Triple clamps
For Sale ; * PE 400 rear wheel
* Montesa rear wheel
* Kayaba remote resevoir shocks(pretty sad)
Oldrodder, i may be able to help out with your bearing retainer.
Look for a CR450R #58 or pm me. By the way, i'm only 30ks from the track and its still p***ing down so bring your waders.Can't wait!
-
I'm chasing 79 YZ 250 or 400 forks & triples & rear hub.
Apparently will also be looking for good gumboots :o
-
I AM AFTER A NOS FRONT GUARD AND LEFT HAND SIDE COVER FOR A 1975-76-77 YZ80.
-
I,m after a CR250RZ seat or base and forks and air box to carby rubber.
Will be at CD5 with snorkle and flippers
-
PM sent to quicky, re:- xt500 seat.
-
A friend of mine has a desperate need for the following:
Exhaust pipe Mk 10 Pursang
Tank for mk 9 or 10
He will put any to good use, check page 61 of VMX 33, photo of no 30 at Whitsunday Classic, his bikes are always immaculate.
I will collect if any available.
cheers, Mike
-
Anyone want a YZ rear hub? I think it's YZ490 with YZ250 backing plate. Can post pic if need be. Free to good home.
-
((((((((((( NATHAN ))))))))))))) Woo hoo. Wake up.. Snooze ya loose
-
Hey Greame if no one has grabbed it yet i would like that YZ hub thanks .Hilly
-
Hey Quicky you had an XR75 tank a while ago minnus a tap,was it a 2 srew or the same as your gold an red tank?
Same tap as the gold bike KB. I have one K4 tank and 1 later type i think xr80 its the red with black stripe on the top looks like a mini XL250S tank. Both of those having the screw on tap.
-
Consider it done. ;)
-
Oh KB... Just for interest. I have discovered XL185s, CT125, XL125 screw on taps all interchange prolly other models too. The one on gold bike is off CT125.
-
All yours Hilly, just look for the #136 RM125 at CD5.
-
my wish list is yz465 cluch cover :o
yz465 kickstart 8)
ossa sdr pistoon ;D
husky cr250/400 74 bits 8)
taking down to sell
fox shock brand new yz400d/e/f with spacer
yz250j tank very good
cr480 barrell mint and new piston
cr480 tank
rm250/400 seat
see ya there rusty
-
RK? Style pipe for YZ80B/C
YZ250A Stator, forks, sprokets, plus some other smaller bits
KX250 76 side plate set
KLX 175 guards
various rims, and other VMX plastics.
various TM75 bits
various KX tin tank parts
for sale somewhere close to the Klub Kevlar Kompound
-
Hey 211,
I won't be at CD5 but I have a pipe which is supposed to be a PK pipe to suit RM80B/C. It's never been used but been sitting around forever. If you are interested send me your email address and I will send some photo's.
Cheers,
K
-
I have to sell..
Dellorto 36mm carby........$50.
TS185 early seat with excellent steel base....$40.
Early model RM80 forks. No rust.... $45
XR75 K4/5 forks.. No rust....$45. Gone.
PM me if intertested. Free freight.. ;D ;D
If anyone wants them I will bring them along to CD-5. If not i'll leave at home.
-
Quicky, get your hand in your pocket, your dreams have come true
http://cgi.ebay.com.au/1973-Honda-CR250M-Elsinore_W0QQitemZ270231257011QQihZ017QQcategoryZ102690QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
-
Shes a bit rich for me at the moment. Thanks for the lead.
Cheers
-
Not for finding, but for sale
At CD5 I will have available tomorrow -
73MXA Exhaust (good-avg) Just needs a new bend.
84 YZ 490L carbi (as is)
MXA Thermal Flows (shocky's) unrestored (offrers)
MXA Front forks and bottom yolk (complete, usable, just need rechroming) (offers)
84YZ49oL(offers)
84YZ25oL(offers)
see U there
-
Front forks and exhaust sold........ rest is back in the shed
-
Hey Greame we must have passed like ships in the night , I will sort out something maybe post ??. I could just transfer some cash into your account whatever suits . thanks Hilly,