OzVMX Forum

Marketplace => For Sale => Topic started by: Nathan S on November 25, 2012, 06:07:31 pm

Title: 1974 Yamaha DT250A clean-out. $200/lot. SOLD, pending payment.
Post by: Nathan S on November 25, 2012, 06:07:31 pm: SOLD, pending payment.

What you see is what you get... along with any other odds-and-sods I might unearth... :D

Frame with motor in it is my original one since forever. Matching numbers, was running great when parked. Since been raped for parts, as you can see.

Triples are YZ-B alloy type. Bottom one was polished up properly, will come good again with minimal work.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT250A/2012-11-25-1043.jpg)

Front hubs are 1K7 and 2A6 types.
(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT250A/2012-11-25-1048.jpg)

Spare clutch cover in this photo is DT360, not 250.
(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT250A/2012-11-25-1044.jpg)

Seat base (under cranks) has two cracks repaired (and obvious surface rust) - makes it the best DT-A seat base I've ever seen (seat on bike was repaired using half an LC Torana roof in 1992 or so...)
(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT250A/2012-11-25-1045.jpg)

Black sprocket suits DT hub. Alloy sprocket is MX-A, has new teeth welded onto old centre. Not sure how well it would work, but seems OK.
Brand new front sprocket in bag (under MX rear sprocket).
(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT250A/2012-11-25-1046.jpg)

Tyres are old but have plenty of tread. Wheel is MX250A.
(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT250A/2012-11-25-1047.jpg)

Ugly looking motor has a beautiful crank. DT-B top end and other parts in photo are included.
(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT250A/2012-11-25-1049.jpg)

$200 for the lot, or make me an offer.

In Yass, southern NSW.
Can deliver to Canberra and possibly further afield for some petrol money.

Nathan
04000 23847

SOLD, pending payment. :)
Title: Re: 1974 Yamaha DT250A clean-out. $200/lot.
Post by: firko on November 25, 2012, 06:19:03 pm: $200 is a steal for someone wanting to build a poor-boy pre 75 racer. Not everyone can afford an OSSA Phantom so if you use these parts carefully and with a bit of lateral thinking, a great little racer can be done for under a $1000.
Title: Re: 1974 Yamaha DT250A clean-out. $200/lot.
Post by: Nathan S on November 25, 2012, 06:23:37 pm: Quote from: firko on November 25, 2012, 06:19:03 pm
$200 is a steal for someone wanting to build a poor-boy pre 75 racer. Not everyone can afford an OSSA Phantom so if you use these parts carefully and with a bit of lateral thinking, a great little racer can be done for under a $1000.

Exactly what I was hoping for... :)

I can help out with some other parts if someone wants to go down that path - front rim, spokes, throttle assembly, kill-switch, etc. There's also a YZ400D carburetor included, that I forgot to take a photo of.
Title: Re: 1974 Yamaha DT250A clean-out. $200/lot.
Post by: jimson on November 25, 2012, 07:06:59 pm: PM sent ;D jimson
Title: Re: 1974 Yamaha DT250A clean-out. $200/lot.
Post by: Nathan S on November 25, 2012, 07:08:09 pm: PM replied.
Title: Re: 1974 Yamaha DT250A clean-out. $200/lot.
Post by: vandy010 on November 25, 2012, 07:50:42 pm: Ive got a similar pile myself and reckon 200quid is a great buy
Title: Re: 1974 Yamaha DT250A clean-out. $200/lot.
Post by: Ted on November 25, 2012, 08:33:40 pm: Quote from: vandy010 on November 25, 2012, 07:50:42 pm
Ive got a similar pile myself and reckon 200quid is a great buy

200 quid is 400 dollars young fella ;)
Title: Re: 1974 Yamaha DT250A clean-out. $200/lot.
Post by: Nathan S on November 25, 2012, 08:34:00 pm: Sold, pending payment. :)
Title: Re: 1974 Yamaha DT250A clean-out. $200/lot. SOLD, pending payment.
Post by: Freakshow on November 25, 2012, 08:45:44 pm: If anyone wants to sell me a set of forks, a MXA wheel complete and those 34 mm triples I'm in....