OzVMX Forum

Clubroom => Tech Talk => Topic started by: JIM77 on November 17, 2012, 01:44:35 pm

Title: Aqua/Vapour blasting Brisbane
Post by: JIM77 on November 17, 2012, 01:44:35 pm

G'Day, I'm new to the forum, have been reading plenty of old posts and there is a few nice builds on here.

I'm in the process of building a 96 CR250, which I know is far from VMX but is a good canvas for my first rebuild, I plan on doing more.

Anyway I know there are is a fella in Sydney doing aqua/vapour blasting, but was hoping someone could point me in the direction of a reasonably priced blaster in Brisbane?

I need things like Brake calipers, cylinder, shock body etc done, and am looking for the raw cast Aluminium look. Would prefer Local so I can deliver and collect, will probably need 2 batches done over the next 6 months.

Thanks Jim

Title: Re: Aqua/Vapour blasting Brisbane
Post by: oldfart on November 17, 2012, 01:56:13 pm

Jim , welcome aboard.
Greg .....turns up to most of the Connondale classic meets with a display and his work is good
Suncoast hydrablast
http://www.suncoasthydrablast.com.au/html/contact.html

Title: Re: Aqua/Vapour blasting Brisbane
Post by: NSR on November 17, 2012, 02:18:42 pm

Yep, Gregs the go.

Title: Re: Aqua/Vapour blasting Brisbane
Post by: YZ250H on November 17, 2012, 02:22:50 pm

yep very good

Title: Re: Aqua/Vapour blasting Brisbane
Post by: JIM77 on November 17, 2012, 02:28:08 pm

He obviously comes with a good rep, I've sent him an e-mail abouts prices etc.

I'm from Brisbane Southside, I'm guessing no one, in and around Brisbane? Will just save a 1.5hr trip each way is all.

Title: Re: Aqua/Vapour blasting Brisbane
Post by: oldfart on November 17, 2012, 04:59:18 pm

We had one in Yatala ... but has closed up shop and is working from home.
Formaly called "Rustbusters "
Not too sure if this tag is current
http://www.rustbusters.com.au/