OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: Ktm181 on November 13, 2012, 12:29:31 pm

Title: 1980 390 auto gearbox shafts.....
Post by: Ktm181 on November 13, 2012, 12:29:31 pm

Hi Guys,

looking for auto gearbox shaft 161263001, anyone have one they will part with? OR point me to where i might obtain one, OR a possible loan of a good one to show to gear manufacturer along with my damaged one to see if can make a new one or repair mine? (will also need the shafts attendant gear), both items butchered back in the 80's, dont know why its owner didnt buy a new one when available!

Cheers,
Kt
Title: Re: 1980 390 auto gearbox shafts.....
Post by: grouty on November 13, 2012, 10:55:12 pm
In Europe we have a great source of auto parts in Jef Bens, based in Belgium.
His english is not good, but send him an email and wait a few days for him to translate etc. I am sure he will have a shaft or several.
Downside is that he does not do paypal. Only bank transfer.

If you speak French, Belgian or Flemish phone him on 0032 14 26 46 53
Or email [email protected]
Title: Re: 1980 390 auto gearbox shafts.....
Post by: Ktm181 on November 14, 2012, 09:15:23 am
EXCELLENT, thanks for the info, i will email him asap.

thanks again,
Kt
Title: Re: 1980 390 auto gearbox shafts.....
Post by: Colin Jay on November 14, 2012, 10:34:10 am
Make contact with Ebay seller "TriTrophy". I have had excellent results with getting parts for my 78 390 Auto through him and he has even source parts for me that he didn't have and his prices are quite good.

CJ
Title: Re: 1980 390 auto gearbox shafts.....
Post by: Ktm181 on November 14, 2012, 11:51:17 am
Thanks Colj,
i will try him also.

Kt
Title: Re: 1980 390 auto gearbox shafts.....
Post by: Huskydoggg on November 14, 2012, 04:07:55 pm
KTM,
I have one NOS 1612 630 01 left. Also lots of other new and used Husky parts including parts for autos.
Steve
huskydoggg.com
Title: Re: 1980 390 auto gearbox shafts.....
Post by: PEZBerq on November 14, 2012, 11:19:15 pm
Tritrophy and Huskydogg both very highly recommended! Ultra helpful and ultra reliable.
Title: Re: 1980 390 auto gearbox shafts.....
Post by: huskibul on November 15, 2012, 08:28:38 am
    PM sent  ktm  :)