OzVMX Forum

Marque Remarks => Suzuki => Topic started by: cocksprocket on October 27, 2012, 04:30:42 pm

Title: oil lines needed
Post by: cocksprocket on October 27, 2012, 04:30:42 pm

hey guys, anyone out there have a set of the oil pump lines for a 1975 tm250 they are willing to part with??  also where is the best place to get a wiesco piston kit for the above bike??  cheers ;D ;D

Title: Re: oil lines needed
Post by: lukeb1961 on October 28, 2012, 07:31:17 am

eBay. try searching for "TM250 wiseco" or "380M07000" readily available circa $101.00

Alpha-Sports lists the lines as still available.
http://www.alpha-sports.com/suzuki_parts.htm
Try calling
Ray at Suziparts in South Australia, http://www.suziparts.com.au/
or Kessners - http://kessnersuzuki.com.au/
or Steve at Mick Hone Suzuki in Victoria http://www.mickhone.com.au
or Tony at http://vintage-suzuki.com/en/

Luke

Title: Re: oil lines needed
Post by: oldfart on October 28, 2012, 07:55:41 am

Yep ....I have 1 sets plus pump :)  I have done the LHS mod.     flick us an email

Title: Re: oil lines needed
Post by: cocksprocket on October 28, 2012, 10:32:19 pm

pm sent old fart!!, thanks lukeb for the info ;D  used to work at Kessners a long time ago and remember ray coming on his old sidecar to pick up parts!! 

cheers for the help ;D ;D ;D ;D ;D

Title: Re: oil lines needed
Post by: Gerard De Ruyter (Twistandshout) on November 07, 2012, 01:27:43 pm

 Oldfart, what's the 'LHS mod'?

Title: Re: oil lines needed
Post by: oldfart on November 07, 2012, 03:47:34 pm

You need to split the cases and remove the crank to do this ....
Basicly removing the oil pump- line's - oil tank  & slinger plate, drilling a hole on LHS so the 2 stroke pre-mix feeds the bearing.