OzVMX Forum

Marque Remarks => Yamaha => Topic started by: YZ250H on October 08, 2012, 07:23:01 pm

Title: YZ465 final drive seal size
Post by: YZ250H on October 08, 2012, 07:23:01 pm

Anyone know it off the top of their head.  i'd like to go to the bearing shop during the week before I pull the old one out.

All help greatly appreciated.

Cheers

Title: Re: YZ465 final drive seal size
Post by: tony27 on October 09, 2012, 04:22:46 am

Just done mine, from memory 32-42-6, pretty certain looking at photo on cmsnl but can't check my old 1 until forearm heals up enough to go back to work

Title: Re: YZ465 final drive seal size
Post by: YZ250H on October 10, 2012, 08:12:54 am

Bang on the money thanks Tony  8) 8) 8) 8)

Title: Re: YZ465 final drive seal size
Post by: tony27 on October 10, 2012, 03:21:39 pm

My pleasure, any luck getting it from the seal shop?

Title: Re: YZ465 final drive seal size
Post by: YZ250H on October 10, 2012, 03:51:24 pm

Got 32 x 42 x 7 locally - $3.85  8).  I don't think the extra 1mm will make any difference. :-\

I can get 32 x 42 x 6 off the internet, but I didn't want to wait ::).

Title: Re: YZ465 final drive seal size
Post by: tony27 on October 10, 2012, 06:03:57 pm

Pretty sure there is easily enough room to allow the extra 1mm, genuine for mine came from OZ & cost me $22 or at least that was what the sticker on the packet said

Title: Re: YZ465 final drive seal size
Post by: YZ250H on October 11, 2012, 07:14:11 am

Maybe I saved a few bucks  :-\  Hope it lasts the distance, but I guess at $4 it's not a big deal.
Thanks for your help Tony.  Much appreciated  8)