OzVMX Forum

Marketplace => For Sale => Topic started by: runutz698 on September 11, 2012, 01:12:18 pm

Title: Villiers 9E engine, Rebuilt - BSA D7 Roller - Suzuki A100 expansion chamber
Post by: runutz698 on September 11, 2012, 01:12:18 pm

Brought a villiers 9e enginge to use in a project but have decided to run a diffrent motor. Engine has no gear box and was mounted on a plate as I belive it was used in go kart racing. Doesn't look much, But after inspection of top end and points cover I would say it was rebuilt and put on the shelf and never started as it is spotless inside. Anyone intrested 200dollars these are hard to find here.

I also have a roller BSA D7 frame and tank which I would say was you for trials as the rear hoop has been cut off. It is a rough but very easy to fix up I would say. Been sitting in shed for years.
200dollars

Suzuki A100 Expansion chamber which was hand made and used on a bucket racer in the 60's, Comes up and sits just under the seat on the left hand side for plenty of ground clearance. All cleaned coated with a chrome muffler all packed ready to use. 350Dollars

email me [email protected]
I will email pictures of parts as requested and will assist to ship but all cost involved are buyers responsabilty.

Title: Re: Villiers 9E engine, Rebuilt - BSA D7 Roller - Suzuki A100 expansion chamber
Post by: EML on September 11, 2012, 03:36:43 pm

where are you at runutz?

Title: Re: Villiers 9E engine, Rebuilt - BSA D7 Roller - Suzuki A100 expansion chamber
Post by: runutz698 on September 11, 2012, 04:34:06 pm

Nunawading VIC, Happy to post all items. Can pull to pces for shipping to make cheaper and can strap to a pallet also. Any takers I am just wanting to clear my shed out.

Title: Re: Villiers 9E engine, Rebuilt - BSA D7 Roller - Suzuki A100 expansion chamber
Post by: runutz698 on September 12, 2012, 06:30:29 pm

Any takers otherwise evilbay it is.

Title: Re: Villiers 9E engine, Rebuilt - BSA D7 Roller - Suzuki A100 expansion chamber
Post by: TM BILL on September 12, 2012, 08:09:17 pm

sent email but got no reply  ???

Title: Re: Villiers 9E engine, Rebuilt - BSA D7 Roller - Suzuki A100 expansion chamber
Post by: runutz698 on September 12, 2012, 10:23:56 pm

Hey TM didin't get it, PM msg me your email and what you are after I can shoot some pictures over!!

Title: Re: Villiers 9E engine, Rebuilt - BSA D7 Roller - Suzuki A100 expansion chamber
Post by: runutz698 on September 13, 2012, 02:55:58 pm

9E Motor sold pending Payment