OzVMX Forum

Marque Remarks => Suzuki => Topic started by: Ktm181 on September 10, 2012, 11:00:33 pm

Title: RM465 suspension part needed.
Post by: Ktm181 on September 10, 2012, 11:00:33 pm

Hi Gents.
looking for a suzuki rear suspension part, its the top-out rubber for the rear shock, suzuki part number 62666-14101, with the rear wheel off the ground the bell crank rests against the round rubber stopper up under the seat, mine is m.i.a. THOUGHT i'd try here before overseas.

ALSO, looking for link to proper workshop manual for '82 RM465Z or to buy, a better one than the clymer one if available.
thanks heaps,
Kt

Title: Re: RM465 suspension part needed.
Post by: Dono113 on September 11, 2012, 11:50:10 am

https://skydrive.live.com/?cid=407d7ef0965d3991&id=407D7EF0965D3991%214430#
Luke Brennan has got alot of manuals, I got my RM500 as well as RM125A manual from this site champ.
 ;D

Title: Re: RM465 suspension part needed.
Post by: Ktm181 on September 11, 2012, 11:52:02 am

Thanks Dono, will try it tonight.

Kt

Title: Re: RM465 suspension part needed.
Post by: Bitten on September 11, 2012, 01:40:56 pm

http://www.alpha-sports.com (in the USA)

and

http://www.suziparts.com.au

Both have been good support for my resto

The bump stop I got NOS on USA ebay for a few bucks

Title: Re: RM465 suspension part needed.
Post by: Ktm181 on September 11, 2012, 01:49:26 pm

Thanks all, barring mis-haps PART FOUND and hopefully winging its way to southern hemisphere in next few days.

Cheers,
Kt

Title: Re: RM465 suspension part needed.
Post by: nigmax on September 11, 2012, 03:13:28 pm

Hey mate,
i have been using these guys for my RM 465 AND 250 resto's
http://www.powersportsplus.com/

Cheers
Nick