OzVMX Forum
Marque Remarks => Yamaha => Topic started by: tony27 on August 23, 2012, 08:01:08 pm
-
Is the bearing for the front of the g,h brake stays available anywhere, from memory the OD is 22.5mm.
I've thought about getting hold of a 490 alloy stay & turning up a new mount to be welded on at the right length then finished to fit a standard GE12E bearing which is 22mm OD
Any other options?
-
I found the size impossible to get as an aftermarket. Have you tried Yamatopdog.com and NWVCP ?
Your modification sounds pretty cool.
Pretty sure there is an alternate part number that is the same thing too. DJRacing knows what it is - you could drop him a PM :-\
-
Haven't actually looked at either of those places but going off all the other places I've looked the bearing seems to be NLA
Pretty sure the part number DJ put up a couple of years ago is the same as listed on cmsnl & boats.net etc which aren't available anymore.
The reason for thinking about using the 490 stay is that I read about someones 465 that had done the same thing although possibly not using an off the shelf bearing & they mentioned needing to shorten the stay, could have been the english site who have the bike listed on ebay at the moment
-
One of these (93399-99906-00) available at Yamatopdog.com (speed and sport). $43 US, but what is the alternative going to cost ya :-\
-
Quite a bit less seeing as I already have 1 for my standard sherco shock which won't be getting used because I went to a much better hand built shock a while ago
-
Fair Call. So the Sherco shock has a spherical bearing in it as well ?.
I reckon your plan sounds like the go 8). Make sure you post up some pictures so we can see the end result. At least then you will have a standard size bearing to replace if it ever buggers up 8)