OzVMX Forum

Marketplace => Wanted => Topic started by: Nipper on August 20, 2012, 08:31:20 pm

Title: RM 125 B clutch basket
Post by: Nipper on August 20, 2012, 08:31:20 pm

Hi, would anyone have a clutch basket to suit an RM 125 B they would like to sell? Cheers

Title: Re: RM 125 B clutch basket
Post by: Freakshow on August 21, 2012, 11:47:15 am

Didnt we go through this one a while back ?

was the basket i put up no use ? cant remeber

Title: Re: RM 125 B clutch basket
Post by: Nipper on August 21, 2012, 02:51:18 pm

I think you offered a clutch cover .I am after the clutch basket.

Title: Re: RM 125 B clutch basket
Post by: Freakshow on August 21, 2012, 02:59:28 pm

this is the things i have kicking around FK's what it is not sure its off anything i currently have here. $20 you can have all it  ( Xcept that plastic dipstick thing i used that a while ago  :D

(http://i33.photobucket.com/albums/d88/munchboxlive/RIMG0764-1.jpg)

Title: Re: RM 125 B clutch basket
Post by: TM BILL on August 21, 2012, 03:31:43 pm

That looks like RM 250N or T maybe PE dont think its 125

Title: Re: RM 125 B clutch basket
Post by: Nipper on August 21, 2012, 04:22:44 pm

Thanks freaky for the offer. But I reckon TM Bill is right it looks too big for the 125. I like the price too so if you got a basket for the 125 i will happily pay 20 bucks for it. Cheers.

Title: Re: RM 125 B clutch basket
Post by: Freakshow on August 21, 2012, 04:36:04 pm

this and a few side covers is all i got post 75 suzuki IIRC

Title: Re: RM 125 B clutch basket
Post by: D project on August 21, 2012, 09:15:23 pm

PM sent ;)

Title: Re: RM 125 B clutch basket
Post by: TM BILL on August 25, 2012, 10:08:16 am

Nipper did you get a basket ?

Title: Re: RM 125 B clutch basket
Post by: Nipper on August 25, 2012, 08:51:01 pm

Yes thanks  Bill I have been fortunate enough to get a basket from here on the forum, D project was the man I can thank for that. I did get a basket locally here in south australia but when i went to fit the basket it had 63 teeth instead of 62 so it was a no go.

Title: Re: RM 125 B clutch basket
Post by: John Orchard on September 08, 2012, 09:44:02 pm

Quote from: Nipper on August 25, 2012, 08:51:01 pm

Yes thanks  Bill I have been fortunate enough to get a basket from here on the forum, D project was the man I can thank for that. I did get a basket locally here in south australia but when i went to fit the basket it had 63 teeth instead of 62 so it was a no go.

Would the A basket work/fit the B?  They both run 17t primary's, I would think that the distance between shafts would be the same, I guess the smaller (less teeth) B basket would raise the overall gearing yeh?  Make use of the longer stroke B & C engines.

Title: Re: RM 125 B clutch basket
Post by: TM BILL on September 09, 2012, 07:32:14 am

B motor compared to an A motor is a slug  ;) B is more rideble for wobblers but if you want to be on the gas get a A motor  :)

Title: Re: RM 125 B clutch basket
Post by: Nipper on September 09, 2012, 07:01:58 pm

Aaah so I am rebuilding the right motor then Bill....

Title: Re: RM 125 B clutch basket
Post by: John Orchard on September 09, 2012, 08:57:22 pm

Ha ha, just raise the exhaust port 1mm and trim the piston skirt 2mm on the B model and you'll get the top end you so desire  :-)

Title: Re: RM 125 B clutch basket
Post by: Nipper on September 09, 2012, 10:19:39 pm

Cheers John that is some food for thought.