OzVMX Forum

Marque Remarks => Suzuki => Topic started by: Viper65 on July 30, 2012, 02:02:55 pm

Title: Suzuki RM400N 1979 Gears wanted
Post by: Viper65 on July 30, 2012, 02:02:55 pm

I have an RM400N 1979 and I need 3rd and 4th gear on the clutch side - any ideas welcome. 
Also does anyone know who can possibly recut the dogs on the original gears, preferably Melbourne area or can post out to anyone around Australia who can do this
Thanks guys!

Title: Re: Suzuki RM400N 1979 Gears wanted
Post by: Doc on July 30, 2012, 04:27:25 pm

A little info that may help, 3rd and 4th drive gears 'on clutch shaft' are the same gears for '76 RM370A thru to '80 RM400T ;)

Title: Re: Suzuki RM400N 1979 Gears wanted
Post by: Viper65 on July 30, 2012, 05:15:27 pm

Thank you very much - all information greatfully received.

Now I've just got to find them... any suggestions!!!

(I'm already doing all the usual internet searches)

Title: Re: Suzuki RM400N 1979 Gears wanted
Post by: smed on July 30, 2012, 06:11:00 pm

Bruce Woodley, Powerflow from Geelong way,undercut my CR125m dogs a few years back & done a good job at a reasonable price :)

I have his contact details somewhere,let me know if you need them unless someone else knows his number ;)

Title: Re: Suzuki RM400N 1979 Gears wanted
Post by: Doc on July 30, 2012, 07:32:49 pm

24231-41202  3RD DRIVE GEAR


24240-41201  4TH DRIVE GEAR

http://www.ebay.com/itm/Suzuki-RM370-RM-370-OEM-NOS-transmission-gear-24240-41200-24240-41201-vintage-/180928183118 (http://www.ebay.com/itm/Suzuki-RM370-RM-370-OEM-NOS-transmission-gear-24240-41200-24240-41201-vintage-/180928183118)

Title: Re: Suzuki RM400N 1979 Gears wanted
Post by: Viper65 on July 31, 2012, 05:33:36 pm

Wow!
You guys have all been more helpful than others I know including motorbike shops.  I now have several leads which I am pursuing.
Thanks
Steve

Title: Re: Suzuki RM400N 1979 Gears wanted
Post by: cr4ever on July 31, 2012, 06:21:03 pm

Colin Woods, Coljen gear cutting and machining, 45 Kolora rd., West Heidelberg, tel 03 9458 2741
Can make new gears and undercut dogs....