OzVMX Forum
Clubroom => Tech Talk => Topic started by: Rookie#1 on July 17, 2012, 12:40:37 am
-
So ive had this sitting around for a while not even knowing what it is!! ::) So i guess here would be the best place to see if someone could give me correct answer as to what its for??? :-\
Cheers, Brendan
(http://i1193.photobucket.com/albums/aa347/rookie110/Shed%20cleanout/020.jpg)
(http://i1193.photobucket.com/albums/aa347/rookie110/Shed%20cleanout/019.jpg)
(http://i1193.photobucket.com/albums/aa347/rookie110/Shed%20cleanout/021.jpg)
-
By the look of the stud holes spacing I'd say 125 Yam
-
i'm guessing similar to JC,
whats the distance between the hole centres and what size is the squish area?
-
I'll get some measurements when i get a chance and post up a little more info :)
-
i dont think its 125 yamaha becuase of the location of the shorter fins on top?
but chuck up some measurments!
-
(http://i1193.photobucket.com/albums/aa347/rookie110/IMG_1125-1-1.jpg)
-
Any ideas????
-
whats the measurement across the chamber ?
-
Any ideas????
52 x 70 is Yamaha.
my guess is it's to fit the YZ125D/E/F as the fins are reduced in the same area as the pipe run.
if the holes are to take an 8mm stud bolt then that'd verify it but if someone wanted to fit it to an earlier model YZ/DT125 all they need do is drill these holes out a bit bigger.
if the bore/area measures 56mm its 125, if it measures 66mm its 175
how much cash we talkin here Rookie?
-
Has Freaky seen the above picture?
-
Any ideas????
52 x 70 is Yamaha.
my guess is it's to fit the YZ125D/E/F as the fins are reduced in the same area as the pipe run.
if the holes are to take an 8mm stud bolt then that'd verify it but if someone wanted to fit it to an earlier model YZ/DT125 all they need do is drill these holes out a bit bigger.
if the bore/area measures 56mm its 125, if it measures 66mm its 175
how much cash we talkin here Rookie?
I'll measure the bore and post up the numbers, as for "how much we talkin" well I really don't know, im no rogue and would pass it off the right person for a more than fair price. Just don't wanna give it to someone for a fair price only to see it passed of for retail value soon after!! >:( if you want it let me know
-
what no price !!!!
i seem to remember some one saying what god is this (yamaha yz) with no price
jim
Rookie#1
C-Grade
Posts: 108
JUST SHUDDUP AND RIDE IT!!
Re: 1977 Yamaha YZ 250D
« Reply #4 on: July 18, 2012, 11:43:06 PM » Quote
--------------------------------------------------------------------------------
Brilliant another bike with no price??? Why must we have pointless babble conversation with someone just to find out what the bike is priced at?? When informing us of a price would largely determine to most if that phone call is even worth making!!
-
what no price !!!!
i seem to remember some one saying what god is this (yamaha yz) with no price
jim
Rookie#1
C-Grade
Posts: 108
JUST SHUDDUP AND RIDE IT!!
Re: 1977 Yamaha YZ 250D
« Reply #4 on: July 18, 2012, 11:43:06 PM » Quote
--------------------------------------------------------------------------------
Brilliant another bike with no price??? Why must we have pointless babble conversation with someone just to find out what the bike is priced at?? When informing us of a price would largely determine to most if that phone call is even worth making!!
Oh for fork sake, Im not even trying to sell it!! Just trying to ID it and someone has shown an interest!!! Alright then I'll make it clear for anyone who's easily confused, this is not a sale advertisement!!!! ::)
-
Has Freaky seen the above picture?
fork knows ???
-
Any ideas????
52 x 70 is Yamaha.
my guess is it's to fit the YZ125D/E/F as the fins are reduced in the same area as the pipe run.
if the holes are to take an 8mm stud bolt then that'd verify it but if someone wanted to fit it to an earlier model YZ/DT125 all they need do is drill these holes out a bit bigger.
if the bore/area measures 56mm its 125, if it measures 66mm its 175
how much cash we talkin here Rookie?
I'll measure the bore and post up the numbers, as for "how much we talkin" well I really don't know, im no rogue and would pass it off the right person for a more than fair price. Just don't wanna give it to someone for a fair price only to see it passed of for retail value soon after!! >:( if you want it let me know
Vandy correctly id the head and asked for a price . Vandy has at least a couple of bikes it would fit and is a confirmed yamaha man , so if he was to own it i dont think it would me moved on anytime soon rather it would be mounted on one of his 125s.
-
Any ideas????
52 x 70 is Yamaha.
my guess is it's to fit the YZ125D/E/F as the fins are reduced in the same area as the pipe run.
if the holes are to take an 8mm stud bolt then that'd verify it but if someone wanted to fit it to an earlier model YZ/DT125 all they need do is drill these holes out a bit bigger.
if the bore/area measures 56mm its 125, if it measures 66mm its 175
how much cash we talkin here Rookie?
I'll measure the bore and post up the numbers, as for "how much we talkin" well I really don't know, im no rogue and would pass it off the right person for a more than fair price. Just don't wanna give it to someone for a fair price only to see it passed of for retail value soon after!! >:( if you want it let me know
Vandy correctly id the head and asked for a price . Vandy has at least a couple of bikes it would fit and is a confirmed yamaha man , so if he was to own it i dont think it would me moved on anytime soon rather it would be mounted on one of his 125s.
Yep, that he did. So he can get in touch with me if he wants it and I'll be happy to give to him for about half what I'd get on eBay for it as it will go to someone who's gonna use it.
-
You won't be able to get the grin off his face ;)
-
actually Rookie,
i already have one and won't be needing it.
i was merely asking to give someone that may be interested an idea of what you'd be wanting.
just glad to help out with the question.
cheers! :)
-
Would the cutaway on the fins be to suit YZ C/X 125 pipe?