OzVMX Forum

Clubroom => Tech Talk => Topic started by: Rider on July 11, 2012, 09:20:30 pm

Title: Yamaha mx360 timing
Post by: Rider on July 11, 2012, 09:20:30 pm

Am having detonation problems with my 1974 mx360. What is the correct setting for the ignition ? I suspect the 2.5mm it was set at is causing the knock .

Title: Re: Yamaha mx360 timing
Post by: Iain Cameron on July 11, 2012, 09:58:14 pm

2.5 is what the Clymer book says the Yz 360 is 2.3  and mx 250 is 2.3   Iain

Title: Re: Yamaha mx360 timing
Post by: Rider on July 12, 2012, 09:11:59 am

Thanks iain, I might give it a run at 2.3mm and see how it sounds.  Terry.

Title: Re: Yamaha mx360 timing
Post by: Freakshow on July 12, 2012, 12:31:39 pm

2.1 -2.3 and up your fuel octane