OzVMX Forum
Marque Remarks => Suzuki => Topic started by: Marc.com on July 02, 2012, 01:40:18 pm
-
Anyone got a hot fork oil set up for the TM400. Is it worth doing the PDS valve thing, I had some Racetech ones in my Harley and it handled worse. ::)
-
Anyone got a hot fork oil set up for the TM400. Is it worth doing the PDS valve thing, I had some Racetech ones in my Harley and it handled worse. ::)
Bullshit a harley couldn't possibly handle worse no matter what you did to it ;D
As for your TM just get out and ride the thing ;) hold the gas on and it will handle fine as is :) after those hardleys you like it will seem like a factory racer even with flat tyres ;D
-
as an indepent opinion ask brentj on this forum.and what bill said.
-
I fitted Yamaha forks to my TM......Solved everything.
-
So let me get that straight if I fit the Harley forks it will work better.
Any thoughts on oil quantity ?
-
Marc if its an L or M model start with 210cc per leg earlier ones start at 190cc per leg :)
-
Marc if its an L or M model start with 210cc per leg earlier ones start at 190cc per leg :)
thanks Bill 190cc of Hypoid it is then :o Harley Davidson actually does a performance fork oil that flows like Golden Syrup so I might go with that.
-
You should end up with around a 105mm air gap ;)
-
You should end up with around a 105mm air gap ;)
thanks for that, I will try em stock first, they might work better now the 2 inches of sludge at the bottom has been flushed out.