OzVMX Forum

Marque Remarks => Suzuki => Topic started by: Cabmkr on June 07, 2012, 03:04:08 am

Title: RM125 X Bump Stop size
Post by: Cabmkr on June 07, 2012, 03:04:08 am

Can anyone tell me the aproximate size of the bump stop on the rear shock for and 81 Rm125. The shaft size is 16mm but I assume the foam/rubber bump stop is long gone, was looking for a thickness on it

Cheers, Chris   

Title: Re: RM125 X Bump Stop size
Post by: suzuki27 on June 07, 2012, 08:06:57 pm

Do you mean the one that sits on the shock shaft or the bump stop on the top rocker arm that connects to the top of the shock?

Title: Re: RM125 X Bump Stop size
Post by: Cabmkr on June 07, 2012, 11:22:40 pm

The one on the shock shaft

Chris
 

Title: Re: RM125 X Bump Stop size
Post by: RMJJ on June 18, 2012, 07:42:43 am

Hi Chris
Sorry for not getting back to you via email, I am a self employed ac engineer and have been busy this past few weeks as the uk has been basking in sweltering temps reaching 28c wow. Lol
It's difficult to measure as I can't get calipers in tony shock now the bikes built but it measures circa 35mm tall by 40mm wide at the top tapering down to 30mm