OzVMX Forum
Marque Remarks => KTM => Topic started by: viper42 on May 29, 2012, 09:52:49 pm
-
I have recently acquired a large range of NOS and second hand Vintage KTM parts, these range from brochures,workshop manuals,swing arms,gasket kits decals, marrzocchi fork seals/springs,piston kits,kick start levers,cables,side covers (gs5/6) even have NEW 76/77 Pipes (2)
Please advise of part number or bike details and I'll see what I can help with
This is not JD'S old stock !!!!!!!!!
Contactable on 0409135777 or PM me
Thanks
-
Anything for a 1978 KTM 250 MC5?? I need a seat (the one I have if from am unknown model and doesn't fit) 38mm forks and clamps, ignition, plus would like to know if you have any thing else??
-
And shocks (14" eye to eye),
Cheers
-
Hi mate - chasing following:
Any motor parts including piston/rings for 1980 350 - preferably entire motor.
38mm Marzocchi forks or just right hand lower leg P/N 503255
Fuel tank P/N 500.07.013.100 or 500.07.013.000 or 560.07.013.100 any condition
KTM 495 1981 Dual Plug Coil P/N 563.31.006.000
Or any parts to suite following:
KTM 400 1974
KTM 250 1980
KTM 350 1980
KTM 495 1981
I will give you a call tomorrow
Best regards
Jac
-
Have just picked up the stock and will be sorting it over the week end. Will get back to you next week
Hi mate - chasing following:
Any motor parts including piston/rings for 1980 350 - preferably entire motor.
38mm Marzocchi forks or just right hand lower leg P/N 503255
Fuel tank P/N 500.07.013.100 or 500.07.013.000 or 560.07.013.100 any condition
KTM 495 1981 Dual Plug Coil P/N 563.31.006.000
Or any parts to suite following:
KTM 400 1974
KTM 250 1980
KTM 350 1980
KTM 495 1981
I will give you a call tomorrow
Best regards
Jac
-
If you could make a list for 77 GS6 250 bits and prices would be good thanks.What pipes are they MC or GS, pistons sizes? Gasket set,seat cover, ELC hunter.