OzVMX Forum
Marketplace => eBay Finds => Topic started by: TM BILL on May 15, 2012, 10:20:10 am
-
http://www.ebay.co.uk/itm/suzuki-rm-125-twinshock-evo-rm125-project-/261024009075?pt=UK_Motorcycles&hash=item3cc63e4b73#ht_500wt_1361
I didnt know Stillmotor made a water cooling system ??? you learn somthing every day ;D
Whats the swinging arm off ? or is it aftermarket ?
Wheels are mid 80s RM i think ???
-
Swingarm look like standard 1979/80 RM125N/T to me.
-
I think the Sw arm is steel ??? maybe TS 250 ER ?
Looks siillar to N or T arm but im sure its steel ???
-
I think the Sw arm is steel ??? maybe TS 250 ER ?
Looks siillar to N or T arm but im sure its steel ???
At first glance it looked like an alloy RM or PE one but I hadn't considered steel to be honest ???
Not so sure now?
-
I rembember one of these cyclic heads on a rm125a road race bike circa 1978, very cool in the day .
-
yeah the swinger is steel,check holes at the l/hand side near the axle for the chain guard and also the welds dont look right
-
The head looks the same as Shinobi, maybe they made it for Stillmotor to market.
-
Swingarm could be off a DR 400
-
Swingarm could be off a DR 400
No, No.... not another swingarm thread!!! ;D
-
Swing arm looks like a DR500
-
I reckon hubs and backing plates are 84/85ish RM and steel suzy swingarm. Interesting bike,be good to look at in the flesh.
-
Front forks & wheels - 84 RM125
Rear wheel - 84 RM125
Cylinder isn't from a C model (carb mount isn't correct)
I think the engine maybe a N or T given the kick starter fixing
Can't work out the carb, certainly not from a RM C model
RM N 125 tank
Steel swing arm
Can't work out the expansion chamber. The connection to the muffler is weird.
Not convinced the head is from a Suzuki. Looks a lot like a Yamaha version ive seen before.
What's the go with the frame mods at the swingarm pivot on the left side.
The engine & frame numbers make no sence
-
In the specs the model year says 1980,so is it a T then with older model short sidepanels :-\
-
That thing has been butchered.. at a closer look you can see it's a N/T model with a B/C rear subframe roughly welded on and it has '84 forks & front wheel :o
-
That thing has been butchered.. at a closer look you can see it's a N/T model with a B/C rear subframe roughly welded on and it has '84 forks & front wheel :o
It's been turdinated ;D
-
I think the bike looks Ok, he has done an ok job.
-
looks like a keeper to me
-
I think the bike looks Ok, he has done an ok job.
Have a closer look at the abortion of a welding job where the subframe attaches to the main frame on the LH side..
-
You'd have to ride it in pre '85 because of the front end and watercooling, with 1977 rear suspension... No thanks
-
looks like a bitza to me
Fixed for you ;D
-
looks like a bitza to me
Fixed for you ;D
:D :D :D