OzVMX Forum

Marque Remarks => Suzuki => Topic started by: John Orchard on April 18, 2012, 07:56:46 pm

Title: RM125B big end, where from?
Post by: John Orchard on April 18, 2012, 07:56:46 pm
If I need a rod, bearing & crank pin for a RM125B, where would I source them from?  Is the N/T model the same?
Title: Re: RM125B big end, where from?
Post by: VMX247 on April 18, 2012, 08:08:35 pm
http://ozvmx.com/community/index.php?topic=23608.msg231339#msg231339

If you are comparing N / T Rm 125 motors  yes they are different in clutch cover ( screw pattern ) most noticable .....  Crank cases also  ;) will not interchange.

cheers
Title: Re: RM125B big end, where from?
Post by: Lozza on April 18, 2012, 11:35:54 pm
Failing that there would be 100's of 100mm rods to use and a crank pin ground down to 19mm.