OzVMX Forum

Marketplace => Wanted => Topic started by: Nathan S on April 13, 2012, 05:23:43 pm

Title: RM125B/C/N/T roller, or frame or whatever. Or maybe PE175 of similar age?
Post by: Nathan S on April 13, 2012, 05:23:43 pm

Posted this earlier, seemed to disappear?!

Anyhow, looking for a starting point for a FrankenBike with an air-cooled RM80 motor - basically going to be an 80cc Vinduro bike - so any of the bigger bikes are going to be too big/heavy (thanks anyhow Dan).

At a minimum, I'd need frame, triple clamps, swingarm, airbox and rear brake pedal - bt a complete roller would be better.

Let me know what you've got.

Nathan.
04000 23847

Title: Re: RM125B/C/N/T roller, or frame or whatever. Or maybe PE175 of similar age?
Post by: John Orchard on April 13, 2012, 06:15:03 pm

I got ...

RM125B bare frame with stock swingarm.
PE175N triple clamps
PE175N forks
PE175N front wheel (with welded crack in rim)

The PE front end was fitted to the frame when I scored it, it works ok.

$100 for the lot if you're interested.