OzVMX Forum

Marque Remarks => Suzuki => Topic started by: rmyzit on February 21, 2012, 01:31:53 pm

Title: RM125T carby
Post by: rmyzit on February 21, 2012, 01:31:53 pm

Hi all. The carby I have on my RM125T is not the standard size and the bore is worn. The venturi measures 36mm by my verniers, the standard carb should be 32mm. So I have decided to buy a new 32mm mikuni while our aussie dollar is on a high.
Can some one suggest jetting and slide sizes they have found to work for vmx use before I order?
My engine is standard, no porting or exhaust mods.
Evo

Title: Re: RM125T carby
Post by: Davey Crocket on February 21, 2012, 01:44:52 pm

The parts book will tell you all the jets/needle, slide etc.....just order it with the correct parts.

Title: Re: RM125T carby
Post by: bazza on February 21, 2012, 02:13:21 pm

or by off Hatrix??? Auzy company,good to deal with, pre jetted some Mikunis

Title: Re: RM125T carby
Post by: rmyzit on February 21, 2012, 09:23:36 pm

Unfortunately not having a parts book or workshop manual......... yet, I've been digging deep into the achives and found this: http://ozvmx.com/community/index.php?topic=13428.0
Anyone agree or disagree with these specs?