OzVMX Forum

Marque Remarks => Husqvarna => Topic started by: hampster on February 13, 2012, 02:42:29 pm

Title: 84 wr sprokets
Post by: hampster on February 13, 2012, 02:42:29 pm

Hi All,

Could any body out in husky land tell us the best place to get front and rear sprokets for a 1984 wr 250?

Thanks Chris.

Title: Re: 84 wr sprokets
Post by: bigk on February 13, 2012, 03:44:36 pm

Any bike shop, they are easily sourced. The front is the same for Husaberg up to 2008. I have 1x 53T alloy left and a few 54 steels. Fronts 12-15T.
Cheers,
K

Title: Re: 84 wr sprokets
Post by: hampster on February 13, 2012, 07:52:48 pm

Thanks bigk,

Tryed the local husky shop with no luck?
 
called the yamaha shop they had the rear in stock and two days for the front.

Thanks Chris.

Title: Re: 84 wr sprokets
Post by: PEZBerq on February 13, 2012, 09:01:32 pm

I strongly recommend the Cycle World mag test of the 84 WR250 suggestion to fit a 56 tooth rear sprocket to this bike. I did on mine and it is fantastic. Pulls strongly through all gears. Cycle World found the stock  53 caused the bike to drop off the pipe between gears an it was very hard to ride. I run the stock front sprocket. I got my rear sprocket from Sprocket Specialists in US as I got frustrated with how difficult it was to source locally.