OzVMX Forum

Marque Remarks => Kawasaki => Topic started by: Muecke on March 19, 2008, 08:38:29 am

Title: Needle Bearing KLX 250 1980 ???
Post by: Muecke on March 19, 2008, 08:38:29 am

Hi,

does anybody know if the needle bearings of the swingarm of the kawasaki KLX 250 1980-81 (size 20x27x25mm) are the same like
needle bearings in any KX from 1978-xxx ????

the original spare part number of kawasaki ist 92046-1001 !!

Thanks for your answering.

Regards from Germany.
Muecke

Title: Re: Needle Bearing KLX 250 1980 ???
Post by: vmx42 on March 19, 2008, 02:57:10 pm

HI Muecke,
Yes the bearings in the KLX are the same as the 78/79 KX125/250. They are very hard to find, so if you locate some I suggest you grab them [and if you find an extra set I will happily buy them from you].

They do come up on eBay occasionally. Ken Smith just found a set in the US and it brought a big smile to his face.

I have been doing a bit of work on my 84 RM125 resto and it seems that the bearings are the same size as the Kawasaki. Pivot Works lists a kit for the RM but not the KX [or KLX]. I will be ordering a set in a few days and will let you know what I find [but I am hoping the bearings will be suitable].

Thanks
VMX42

Title: Re: Needle Bearing KLX 250 1980 ???
Post by: Muecke on March 19, 2008, 08:40:12 pm

:) that would be nice hearing from you again!

I will contact you when I could get some in future!!! I won't forget you.....

Title: Re: Needle Bearing KLX 250 1980 ???
Post by: gtmpaul on March 27, 2008, 07:49:28 am

Hi, they are still available in the UK
I changed mine last year. Cradley Kawasaki had them in stock
Paul

Title: Re: Needle Bearing KLX 250 1980 ???
Post by: Muecke on February 03, 2009, 02:33:58 am

hi,
I have some problems to put the swingarm and the needle bearings together again, after replacing the needlebearings.
I only have a bad copy of the service book. There I cannot find out how the needles, the oil rings and the sleeves should be.
I have the problem that the swingarm does not match in the frame because it is too wide.

Can anybody post a foto or give me some details of the service book in good quality?

Thanks a lot
Bye
Sven