OzVMX Forum

Clubroom => Bike Talk => Topic started by: mudguard on February 05, 2012, 08:38:11 pm

Title: Info required for Yamaha IT forks.
Post by: mudguard on February 05, 2012, 08:38:11 pm

Just need the correct info for the following questions?

Was there a 1977 model IT 175?
If so, are the forks for the 175, the same forks on the 250 & 400 for 1977 models?
What is the total length of the forks and are they 36mm diameter?
Any help would be appreciated.

Cheers.

Title: Re: Info required for Yamaha IT forks.
Post by: the stig on February 05, 2012, 08:51:07 pm

      My 1977 it 175 Forks   are 36mm.   900mm overall  820mm from the axle to

      the top of the Fork leg..

      not sure what sizes 250 400 have on them.. .

      The  Stig..

Title: Re: Info required for Yamaha IT forks.
Post by: mudguard on February 07, 2012, 08:27:36 pm

Thanks, the stig. That info will help.

So does anyone know if the forks for the 1977 IT250 & 400 are the same as the IT175?
Where are the IT guru's when you need them?  :D

Title: Re: Info required for Yamaha IT forks.
Post by: Freakshow on February 07, 2012, 10:49:12 pm

I have got what i think are them forks here.  IS any one interested in buying them ? i have no use for them as ill my stuff is 34 or 35 mm.

Title: Re: Info required for Yamaha IT forks.
Post by: valleyam on February 08, 2012, 06:06:13 am

if you want info about IT yamaha go here http://www.yamahait.com.au/forum/index.php

Title: Re: Info required for Yamaha IT forks.
Post by: Nathan S on February 10, 2012, 11:34:25 pm

IT250/400D forks are 36mm.
I think they're longer overall than the 175 forks, and may have different lower legs, but wouldn't bet money on it.