OzVMX Forum

Marketplace => Wanted => Topic started by: Gippslander on January 16, 2012, 11:45:43 pm

Title: Bearing for 72-74 CR450 husky small end
Post by: Gippslander on January 16, 2012, 11:45:43 pm

Looking for a small end bearing for a 72 husky CR450, size is 20x24x30, husky part no is 16 10 601-01

Would try Fernando but he has said he is giving it a rest for a while.

Have looked at the usual US and UK suppiers, have everything but.
 
Have looked at the Bultaco parts lists, they have a needle roller the correct dimmensions but the picture shows it with 2 rows of rollers, not game to try that.

There is a place in the Ukraine that lists them, scared to give them my credit card Number  ::)

Huskydogg in Canada has them -- ordered one -- but he slipped up on the post and has sent it surface -- so will probably get here about 3rd round of the VCM series  :'( ,  he apologised and has been good on stock/price and deliveries before, so no problem s##t happens, I will buy of him again, but looking for one a bit quicker and the Canada one will be a spare.

Title: Re: Bearing for 72-74 CR450 husky small end
Post by: VMX60 on January 18, 2012, 10:49:59 pm

There is a 20mm s/e bearing off a Seedoo water ski model that will fit your Husky

Might be the 750cc twin model not sure the local agent should know what model you need with 20mm bearings

Cheers

Title: Re: Bearing for 72-74 CR450 husky small end
Post by: Gippslander on January 18, 2012, 11:13:27 pm

Thanks VMX60, will follow up on that.
Thanks Bendigo Dirt Bikes for the suggestion re a US supplier.
Thanks Shoreline for the pm -- may use your US contact if I get stuck.