OzVMX Forum

Marketplace => Wanted => Topic started by: Doc on March 16, 2008, 12:58:38 pm

Title: Wanted dead or alive TM250 cylinder head
Post by: Doc on March 16, 2008, 12:58:38 pm

would prefer it to be alive and unharmed but I need another head to replace a borrowed but 'not for sale' item  being used currently :( if anyone has a head in surplus I'd surely be interested  ;) email [email protected] or message me here. Thanks 

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: holeshot buddy on March 17, 2008, 09:45:13 pm

HEY DOC ANY CASTING MARKS OR NUMBERS ON TM HEAD
HAVE ABOUT 4 BOXES OF AIR COOLED SUZY HEADS CAN HAVE A LOOK FOR YOU
rusty ;D

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: Doc on March 18, 2008, 08:50:24 am

Thanks Russ, no special markings/numbers but here is a picture of the item.

(http://img186.imageshack.us/img186/5718/tuesday100308004hm9.th.jpg) (http://img186.imageshack.us/my.php?image=tuesday100308004hm9.jpg)(http://img166.imageshack.us/img166/8642/tuesday100308005sm6.th.jpg) (http://img166.imageshack.us/my.php?image=tuesday100308005sm6.jpg)   

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: Freakshow on March 18, 2008, 09:31:27 am

YEp has made in Japan on it..............    ;D

why dont you just use the one you took the picture of DOC  ::)

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: Doc on March 18, 2008, 04:54:42 pm

well I would use it Freaky and I did but now the motor is apart I thought it would be the ideal time to return this item as it's a loaner. It almost got lunched too so give it back before I break it me thinks  ::)

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: holeshot buddy on March 20, 2008, 10:59:24 pm

hey doc i might have found one looks same even has that little hole on edge
does the spark plug go on an angle ???

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: Doc on March 20, 2008, 11:25:29 pm

a maybe is better then no  :P the plug goes straight in at top centre of the squish chamber..there is a 2nd hole also at about a 45° angle though it's 'normally' blanked off  ;)

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: holeshot buddy on March 20, 2008, 11:32:29 pm

it looks the same the plug hole is in the centre but plug is on slight angle  ???
is that right ;D

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: holeshot buddy on March 20, 2008, 11:50:04 pm

its at work i will have a better look on tuesday ;D

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: Doc on March 21, 2008, 07:48:01 pm

hmmm.. :o I reckon it's cross threaded!! , I'll give ya $1 for it anyway :P

:D

nah it sounds like it could be right Russ, no hurry as the motor hasn't even been pulled from the bike for repair yet so assembly is a little way off ;)

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: oldfart on March 23, 2008, 09:04:56 pm

Doc- Have you had any luck with procuring a Head yet ????

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: Doc on March 24, 2008, 03:14:23 pm

not as yet Stew..Tuesday may turn up something at Motowreck though. No desparation at present  ;)

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: cyclegod on March 24, 2008, 03:41:12 pm

Hey Chris, there is a swap meet here in perth next sunday I will have a look and ask around for one while I am there.

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: Doc on March 24, 2008, 07:26:19 pm

Cheers Mick thanks  ;)

Title: Re: Wanted dead or alive TM250 cylinder head
Post by: paul on March 24, 2008, 07:33:37 pm

ask gator he found a complete bike for 200