OzVMX Forum

Marketplace => For Sale => Topic started by: Nathan S on January 08, 2012, 10:02:50 pm

Title: DT1 pre-70 race bike.
Post by: Nathan S on January 08, 2012, 10:02:50 pm

*No ignition fitted, but will come with my box of points ignitions.
*No seat foam or cover, but easily available on Ebay.
*Footpeg bracket not fitted, but included (see second photo).

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012192.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012191.jpg)

Pre-70 class racer, took me to 5th place at the National titles a few years ago (was =4th, but got punted on count-back, grumble grumble...  :D ).

Totally legal bike...
Was stripped back to a bare frame and rebuilt. Has done about half a dozen meetings since.

Piston port barrel with fresh bore, also have a new next oversize piston ready for when its needed.
32mm(?) carb from an RT1.
Pipe made to old-school specs.
Cylinder ported to DT1MX specs.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012193.jpg)

Alloy rims laced into original hubs (NOS front spokes).
Alloy-bottomed 34mm forks, with excellent chrome.
Good chain and sprockets.
Near-new Gazi gas shocks.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012197.jpg)

Almost brand new Michelin MH3(F) and S12(R) tyres - 95% good or better.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012194.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012195.jpg)

Renthal 764 bars.
Good levers, grips etc.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012196.jpg)

Was running an IT250 CDI ignition (bolts straight on), but will include my bucket of original points ignitions. IT ignition available by negotiation.

No seat foam or cover, but have a very good base. Foams and covers are easily available on Ebay.

Silencer needs repair/replacement.

Spare include a piston port barrel, engine covers (inc early raised lettering clutch cover), new genuine front sprocket, good original rear guard, and whatever else I can find.

$700 as is???

Will sell for less if I can keep the tyres and/or rear shocks (have some decent tyres to put on instead, and can probably find some shocks to keep the rear guard off the tyre).
Also have a pair of 35mm Spanish Betor forks and Montesa triple clamps that were destined for this bike - available by negotiation...

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012198.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/BikeOffLoads/DT1/01082012199.jpg)

Short, fairly pointless action vid from a few years ago - its the black bike chasing down the CZ: http://www.youtube.com/watch?v=Q48NJm9ibvQ



In southern NSW, near Canberra.

Nathan. 04000 23847

Title: Re: DT1 pre-70 race bike.
Post by: firko on January 08, 2012, 10:20:07 pm

   PM sent. I'll take it Nathan.

Title: Re: DT1 pre-70 race bike.
Post by: oldyzman on January 08, 2012, 10:34:09 pm

Good value.... expect to see it a nepaen dt firko???
Brett

Title: Re: DT1 pre-70 race bike.
Post by: firko on January 08, 2012, 10:44:44 pm

Quote

Good value.... expect to see it a nepaen dt firko?

No, probably not Brett...I've got both flat trackers almost ready to go for that. If I'm the chosen new owner it'll be assembled and presented as a pre 70 racer to  a mate for his 60th birthday. After I've swapped the good seat base and shocks for my DT1 from Hell revamp. ;D

Title: Re: DT1 pre-70 race bike.
Post by: Nathan S on January 08, 2012, 11:06:25 pm

On hold, pending payment.  8)

Title: Re: DT1 pre-70 race bike.
Post by: jimg1au on January 09, 2012, 06:01:05 am

nathan how much for the montesa forks
jim

Title: Re: DT1 pre-70 race bike.
Post by: fatboyracing on January 09, 2012, 06:01:18 am

Hi Nathan I would be interested in the forks if still avaliable could you email me details price etc.

Cheers
Fatboy

Title: Re: DT1 pre-70 race bike.
Post by: firko on January 09, 2012, 08:21:20 am

Sorry boys........i bought the forks with the DT1.

Title: Re: DT1 pre-70 race bike.
Post by: Curly3 on January 09, 2012, 09:53:24 am

So Fork Off.  ;D

Title: Re: DT1 pre-70 race bike.
Post by: firko on January 09, 2012, 10:29:55 am

Quote

So Fork Off. 

I'd never be so rude to my friends Shane and Jim. ;D

Title: Re: DT1 pre-70 race bike.
Post by: fatboyracing on January 09, 2012, 04:31:08 pm

Come on Firko havent you got enough sets  ;D They would suit my pursang frame I just won on ebay on the week end

cheers
Fatboy

Title: Re: DT1 pre-70 race bike.
Post by: jimg1au on January 09, 2012, 04:47:28 pm

hay
i was in before you fatboy and i want then for a montesa i am building

Title: Re: DT1 pre-70 race bike.
Post by: firko on January 09, 2012, 05:54:46 pm

Quote

Come on Firko havent you got enough sets   They would suit my pursang frame I just won on ebay on the week end

You can never have too many sets of Betors Shane (and Jim)  but in truth I bought them for my mate Jonesy who needed a set for one of his projects.