OzVMX Forum
Marketplace => Wanted => Topic started by: firko on December 22, 2011, 02:28:52 pm
-
I'm looking for the following.....
*Yamaha DT1 seat base...preferably rust free but that's probably wishful thinking, anything will do as long as its repairable.
*Yamaha DT2MX tank, side panels, seat base.
*Yamaha RT2MX, Barrel, head or complete engine if that's what you've got.
*Suzuki RM 250/370 A/B tank in any condition but preferably reasonably straight.
-
I have a bad condition rm 250a tank with nos cap if it is of use I also have a motor and frame rm 250a I would sell, thanks Michael.
-
I would like some 31mm CR125 forks for my Santa sac.Need the chrome to be servicable.
Have some very nice 35mm CR125 forks (1977) for somebody else's Santa sac.
-
Blonde, natural.
5' 10"
36 24 36
35 - 45 yo
Billionaire heiress
Must love motorcycles.
I'm not asking much.
-
Something Husqvarna to whack under this plz !! :P
(http://i146.photobucket.com/albums/r259/vmx247/Talon002-1.jpg)
-
You got one of those el-cheapo wipper snipper motors there Ali? ;D.....my wish list is to finish the 5 bikes I have on the go ::)
-
YZ 360A MOTOR
PLEASE
-
Blonde, natural.
5' 10"
36 24 36
35 - 45 yo
Billionaire heiress
Must love motorcycles.
I'm not asking much.
Hey SlideRulz . . . Easier to find than some of Firko's list . . . I'm marrying one in Feb . . . . . . except she dosent have any money (bugger).
-
Crap! I have observed my collection of subtle stupidity has declined to the point that allows me to assess the lack of supply of any of the above required antiquities Firko. >:
Still will ya settle for a year or three of good comfortable health for us both? Well for everybody Cheers Tim754 (Chasing a DT1 seat base lead up for you ;)..)
-
'm looking for the following.....
*Yamaha DT1 seat base...preferably rust free but that's probably wishful thinking, anything will do as long as its repairable.
*Yamaha DT2MX tank, side panels, seat base.
*Yamaha RT2MX, Barrel, head or complete engine if that's what you've got.
*Suzuki RM 250/370 A/B tank in any condition but preferably reasonably straight.
Although it'd be nice to pick up any or all of the above bibs and bobs, my most important wish is to get my buggered bits fixed and working properly so I can enjoy riding and perhaps even racing my ever growing family of bikes again.
I also hope that those of you suffering from illness, depression and even financial hardship can finally see a light at the end of the tunnel and enjoy life a little more in 2012. ;)
-
Firko, be careful asking for your 'buggered bits' to be fixed. You might get more than you bargained for... :D
-
Firko, be careful asking for your 'buggered bits' to be fixed. You might get more than you bargained for...
Hmmmmm...never thought of that ;D ;D ;D ;D ;D
Another wish is to see this forum return to its former glory and for the members who've gone missing to come on back. The forum's only as good as what we can put into it and a number of those who've bailed out have contributed shitloads of good, useful and interesting stuff in the past. In recent days we've seen Doc and Mick De return so lets hope that 2012 sees as many of the other "retirees" return to the fold.
I have a bad condition rm 250a tank with nos cap if it is of use I also have a motor and frame rm 250a I would sell, thanks Michael.
Michael...Do you have a photo you could PM me matey? How much do you want for it?
-
Ill have the same as "sliderulz". If natural not avaliable I will settle for fake
-
Firko - in my searching for an RM370 - I found there are several tanks on US ebay at the moment - however all are ridiculously expensive I feel?
-
Firko - in my searching for an RM370 - I found there are several tanks on US ebay at the moment - however all are ridiculously expensive I feel?
Yeah Ross, I don't want to pay crazy money for something that might not fit into my evil project plan. A dented one will do....I'll repair, bog and paint before I pay the money they're asking.
A dumb question from someone who's never had a lot to do with RM's...............
Is the '76 RM125 tank alloy or is it a steel carry over from the TM? If it's alloy, a 125 tank will also work for what I have in mind.
-
XR 200 motor or complete bike please.
-
Firko - in my searching for an RM370 - I found there are several tanks on US ebay at the moment - however all are ridiculously expensive I feel?
Yeah Ross, I don't want to pay crazy money for something that might not fit into my evil project plan. A dented one will do....I'll repair, bog and paint before I pay the money they're asking.
A dumb question from someone who's never had a lot to do with RM's...............
Is the '76 RM125 tank alloy or is it a steel carry over from the TM? If it's alloy, a 125 tank will also work for what I have in mind.
what about a rm 100 alloy tank
-
The 76/77 rm125 tanks are alloy and a little smaller than the 250/370 tank.
-
The 76/77 rm125 tanks are alloy and a little smaller than the 250/370 tank.
Cool John, that might suit my needs better. Does anyone have an alloy RM125 tank they're prepared to sell?
-
http://www.ebay.com.au/itm/suzuki-rm-125-vmx-77-model-/330660369750?_trksid=p3286.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D5111875652604854400
-
thats a 76 rm125a and hard to get rods and pistons for coz of 16mm piston pin
-
http://www.ebay.com.au/itm/suzuki-rm-125-vmx-77-model-/330660369750?_trksid=p3286.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D5111875652604854400
Hey Firko if you buy this Ill give you $50.00 for the rear wheel.
-
Hey Firko if you buy this Ill give you $50.00 for the rear wheel.
Nah, I need another pile of shit blocking up the shed like I need a tropical disease ;D.
Young Michael has come to the party with an RM250A tank.
I'm off to my Aunties for the family Christmas lunch/dinner. Merry Christmas Mick and everyone up your way.
-
Hey Firkus Maximus!!! May be able to help!? I'm doing a clean-out so I'll need to have a look around. Contact me on 0427 926 149