OzVMX Forum

Marketplace => Wanted => Topic started by: AdamN on November 10, 2011, 10:29:56 am

Title: YZ465/490/500 Crank Half Needed
Post by: AdamN on November 10, 2011, 10:29:56 am

Hi everyone,
has anyone got a really good stator side YZ crank half surplus? The one on this WR500 I'm fixing has pitting right where the seal runs >:(. I have cleaned it up with emery in the lathe but it is still questionable and I don't want to risk using it. Shame really, as I don't think it has ever been out of the cases, it is perfect apart from the important bit :'(.
 So if you have a really good one that you are prepared to move along, I would love to talk to you>

Cheers
Adam

Title: Re: YZ465/490/500 Crank Half Needed
Post by: vandy010 on November 10, 2011, 11:17:56 am

or,
head on down to your local Bearing shop and grab a
"SPEEDE" sleeve.
it's a super slim shim/sleeve that fits real snug to the shaft and goes underneath the seal and available in a good range of sizes.
you could be lucky.

Title: Re: YZ465/490/500 Crank Half Needed
Post by: AdamN on November 10, 2011, 11:24:49 am

Yeah, Speed-E sleeve is plan c..........or D.......or :D

Adam

Title: Re: YZ465/490/500 Crank Half Needed
Post by: gsr on November 10, 2011, 12:07:53 pm

i have one out of a '86yz490 not sure how good it is though,, will take pics and upload them if you are interested??

Alex

Title: Re: YZ465/490/500 Crank Half Needed
Post by: TT5 Matt on November 10, 2011, 10:13:06 pm

nice g sting pony tail band ;D ;D but dont have any crank parts

Title: Re: YZ465/490/500 Crank Half Needed
Post by: Davey Crocket on November 10, 2011, 10:33:30 pm

We repair them by machining down the crank  and making a "sleeve", that way it stays the same size and it doesnt effect the cranks integritty. Speedy sleeves arent allways available the right size and once you fit it you will destroy it if you have to pull it apart.