OzVMX Forum

Clubroom => Tech Talk => Topic started by: Kenneth S (222) on November 03, 2011, 06:53:28 am

Title: Can anyone recommend a good Wiseco Supplier for a 79CR250 Std Set of Rings?
Post by: Kenneth S (222) on November 03, 2011, 06:53:28 am

Hi Guys, I'm looking for a standard set of rings for a Wiseco 431m07000 piston. Does anyone know of a reliable supplier who carries good stocks?

Thanks KJ

Title: Re: Can anyone recommend a good Wiseco Supplier for a 79CR250 Std Set of Rings?
Post by: Barney on November 03, 2011, 08:14:01 am

KJ, I recently had to get some Wiseco rings oversize for an 84 Cr250 - this guy was really helpful - they are the australian agents
Matt Brown
Serco Pty Ltd
108-114 Steel St
CAPALABA QLD 4157
Direct Ph: 07 3362 6613
Ph: 07 3362 6600
Fax: 07 3362 6610
Email: [email protected]
Web: www.serco.com.au
 
I would try him.
barney

Title: Re: Can anyone recommend a good Wiseco Supplier for a 79CR250 Std Set of Rings?
Post by: Kenneth S (222) on November 03, 2011, 12:56:06 pm

Thanks Barney, much appreciated.

Title: Re: Can anyone recommend a good Wiseco Supplier for a 79CR250 Std Set of Rings?
Post by: Hoony on November 03, 2011, 01:01:41 pm

Serco is definitely your first option to try.

if they have no stock, try Ken Colvin Pty Ltd as he is the Victorian agent for wiseco ( gets his stuff from Serco)

Ken Colvin Pty Ltd
Unit 4, 1 Culverlands St, HEIDELBERG WEST, VIC, 3081
Phone: (03) 9459 1158
   

Title: Re: Can anyone recommend a good Wiseco Supplier for a 79CR250 Std Set of Rings?
Post by: bigk on November 04, 2011, 09:13:38 am

Make sure you specify if you have the standard chrome bore (CDM rings) or a cast bore (CD rings). The guys at the end of the phone may not ask.
K

Title: Re: Can anyone recommend a good Wiseco Supplier for a 79CR250 Std Set of Rings?
Post by: Kenneth S (222) on November 05, 2011, 05:42:39 am

Thanks Guys, much appreciated. Serco has them.