OzVMX Forum

Marketplace => Wanted => Topic started by: 35elsinore on October 24, 2011, 09:50:56 pm

Title: 73/74 cr125m ignition
Post by: 35elsinore on October 24, 2011, 09:50:56 pm
Looking for all components for a project. Please let me if you have any or all to sell. Not sure but later model cr125's maybe compatible.
Rotor, stator, coil, CDI
Cheers Troy
Title: Re: 73/74 cr125m ignition
Post by: Freakshow on October 24, 2011, 10:09:33 pm
do MT 250 bits work ?
Title: Re: 73/74 cr125m ignition
Post by: 35elsinore on October 24, 2011, 10:12:50 pm
MT250 are not CDI, so even the coil isnt compatible.
Did ya have a look at the photos Freaky
Title: Re: 73/74 cr125m ignition
Post by: Freakshow on October 24, 2011, 10:16:50 pm
I have no idea about Honda's just i have a few mT motors and 250 bits i want gone.

Yep, when though the pics - Pm me your address and ill post back you Zip drive.  Did you see the DVD yet ?

Did you have a look at the ones from the weekend and did you see this little bike... kinda what your trying to build right ?

(http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/300935_2564802926514_1447363651_3019389_1519534590_n.jpg)

Title: Re: 73/74 cr125m ignition
Post by: Freakshow on October 24, 2011, 10:22:39 pm
And then this bloke with the fancy pants pipe... ehehe

(http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/297774_2564824487053_1447363651_3019445_2014791371_n.jpg)

and i didnt mind this little table top, was just the right length to be user freindly and a nice down ramp

(http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/316100_2564835967340_1447363651_3019471_481940279_n.jpg)
Title: Re: 73/74 cr125m ignition
Post by: 35elsinore on October 24, 2011, 10:26:56 pm
Yes that xl185 was very impressive. I dont think it come off the throttle stop, just the gears went up and down. The vid was awsome. The turn out wasnt so good tho. Iwonder if C/Brook club could put in for State titles next year. This would upset Levis no end tho and they have kept it alive until now. Dont worry about the flash drive, Im sure it will come back some day with something else on it.
Title: Re: 73/74 cr125m ignition
Post by: 35elsinore on October 24, 2011, 10:30:16 pm
After six years of racing its not such a fancy pants pipe on the bottom anymore. Great photos, who the happy snapper.
Title: Re: 73/74 cr125m ignition
Post by: Freakshow on October 24, 2011, 10:53:27 pm
were looking into having the state title as a 2 leg event.  we just need to find another club that close enough to the numbers so its viable.  can do CB if we link in with the Sidecars and run the same program as they did, but the sideies like longer rides.  have a think about it and well get it up.  i think 2 rounds would be good.  we could do morgan ? kieth ? might get a few interstaters.

Lotsa crew couldnt make it as there where other things on, being end of season.  they reckon it was more numbers than last year, but the regualrs wherent there.
Title: Re: 73/74 cr125m ignition
Post by: Freakshow on October 24, 2011, 10:55:11 pm
yer saw your pipe bottom out on the left hander past the dam. left a big white mark on the ground.  had a laugh at the time.

heaps of pics on Face book, you on it ? ill flick you some links. ;)

(http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/317488_2564884128544_1447363651_3019606_1864884163_n.jpg)
Title: Re: 73/74 cr125m ignition
Post by: 35elsinore on October 24, 2011, 11:05:45 pm
Keith sound like an interstate drive for me, at least an 8hr drive from Whyalla. But if that will increase the track action Im all for it. The numbers for vintage were certainly less than last year but overall there was probable more bikes. I actually realy enjoyed the sidecars and was very impressed with the females involved. I always believed you needed bike balls for sidecars but it seems you dont need any at all as the girls were beating the boys. Seeing a crew from Queensland was impressive to.
Title: Re: 73/74 cr125m ignition
Post by: 35elsinore on October 24, 2011, 11:09:49 pm
A bit of a scuffle always spices up the day to. Of course that was a modern bike thing not the gentlemans class
Title: Re: 73/74 cr125m ignition
Post by: Freakshow on October 24, 2011, 11:32:39 pm
yeah i think dale newman and luke blessing had words before during and then started swinging after.. hehehe

YEah next year we will putit out there to see if anyone what to run it as a 2 part series.  we got heaps of DT stuff on too as well as the nats so finding a spare week is hard.  YOU should do DT, i think we are going to do a meeting at morgan next year or trying to .  i can lend you a rear tyre.  other talk is a double the dirt up there, sat night DT and sunday MX.  kind of an iron man thing.  Heaps of shit we can do but we just need to have numbers to make it worth the permits.  or tag onto others events, most will do it if we have 6-10 bikes for a classificaiton, i can do the paper work.
Title: Re: 73/74 cr125m ignition
Post by: 35elsinore on October 24, 2011, 11:45:59 pm
Keen to have a crack at DT. Do you get many there. Might be able to muster some more boys from here for DT, no one has realy mentioned it before. We have our own flat track event which we still run knobbies for. Usually the track is flooded which makes for a lot of fun and cleaning up. A two dayer might atract some interstaters aswell if it fits there calender. Flick them links when you get a chance.
Title: Re: 73/74 cr125m ignition
Post by: Freakshow on October 26, 2011, 11:53:10 am
Just go on FB and look up Aussie classic motorcross ( its been renamed after CB finished )