OzVMX Forum

Marketplace => For Sale => Topic started by: bigk on September 28, 2011, 11:26:34 am

Title: parts
Post by: bigk on September 28, 2011, 11:26:34 am

I have aquired some ex wreckers stock and there is a fair amount of 1984 Honda CR250 engine & small chassis parts, 1 box of 1982 Honda CR250 parts, 1 box of 1986 Suzuki RM250 parts and some 1979/80 KX80 parts. If anyone needs anything let me know and I'll see if I can help. I have a heap of frames as well, mostly trail & enduro, a few MX'ers and a pile of forks & wheels.
Cheers,
K

Title: Re: parts
Post by: head on September 28, 2011, 01:49:07 pm

Hi Kev
I am after a 84 model disk brake front end that is 43mm tube diameter. Would you have any thing?
Regards Neil

Title: Re: parts
Post by: bigk on September 28, 2011, 04:48:36 pm

No disc fronts sorry.
Cheers,
K

Title: Re: parts
Post by: Slakewell on September 28, 2011, 04:52:41 pm

Honda 82 CR front end?

Title: Re: parts
Post by: bigk on September 28, 2011, 05:28:06 pm

Yep, but they are spoken for.
Cheers,
K

Title: Re: parts
Post by: Brian Watson on September 28, 2011, 05:37:50 pm

Big K , what about a front  and a rear rim...21 and 18....something that suits a conical hub , both front and back..??

Title: Re: parts
Post by: Hardo on September 28, 2011, 07:24:11 pm

Do you have any old Kawasaki frames Big K?
I am looking for an old KX (80-81) ish frame to be a donor for a bracket...

 :)

Title: Re: parts
Post by: steve7406 on September 28, 2011, 08:15:01 pm

Big k i'm after a back hub or comlpete back wheel for a 1977 suzuki rm 125b . Thanks Steven.

Title: Re: parts
Post by: bigk on September 29, 2011, 08:40:57 am

Watto, I have a 21" sun rim (gold) and an 18" Honda (silver) taken from '79 CR250 hubs. I could probably round up a silver front if you want a matched pair.
Hardo, I have a spare '79 or '80 KX80 frame and a zillion other frames. Maybe send me an idea of the bracket you want and I might be able to find something similar on something else.
Steve, no luck with an RM125B rear wheel.
Cheers,
K

Title: Re: parts
Post by: Tossa on September 29, 2011, 09:15:14 am

Going to throw my hat in the ring
Suzuki RM250X needs

engine mounting brackets and bolts
front and rear brake backing plates
front and rear axles
torque link set (the rear brake stabilising bar that attaches to the frame)
 
cheers

Barry

Title: Re: parts
Post by: bigk on September 29, 2011, 09:39:54 am

No RM250X parts sorry, sold the lot just recently, but it was only engine parts.
Cheers,
K

Title: Re: parts
Post by: Tossa on September 29, 2011, 11:13:46 am

thanks K, If you don't ask, you'll never get an answer

Title: Re: parts
Post by: Tossa on September 29, 2011, 11:45:11 am

how about a 74/75 Husky CR/WR400 swing arm

Title: Re: parts
Post by: Hardo on September 29, 2011, 10:37:36 pm

Thanks Big K ... if you could help me that would be great !

Here is a pic of the side cover bracket I need...
 ;D
(http://i430.photobucket.com/albums/qq26/Hardo105/Bike%20Stuff/KX125_Frame.jpg)

 :)

Title: Re: parts
Post by: carbyman on September 29, 2011, 10:54:10 pm

Any 83 kx250C1 parts just collecting what i can

Title: Re: parts
Post by: bigk on September 30, 2011, 08:49:46 am

Tossa, there is a Husky swingarm there, looks like a '76 but slightly different, definately not '73 or '77 as I have bikes to compare with. Send your email and I'll shoot you a photo.
Hardo, I'll be be able to sought that one for you, send your postal address.
Carby man, I think there's an '83 fuel tank but that's about all.
Cheers,
K

Title: Re: parts
Post by: Tossa on September 30, 2011, 09:07:47 am

PM sent

Title: Re: parts
Post by: Brian Watson on September 30, 2011, 02:28:33 pm

Baz, do you want a "standard" Husky arm or are you looking for a "Mag" arm?...The mag arm was used in the 1974 CR 250's and also the 75 WR's....I have a standard arm, is that what you want?....

Title: Re: parts
Post by: Tossa on September 30, 2011, 03:05:49 pm

I'm just looking for the swing arm to fit the WR400 (75) I've acquired, all i know in my great wisdom is it's the same as the 74 model, if a standard one is what is required then that will do.  Was going to contact MW to see if he could advise

Title: Re: parts
Post by: steve7406 on September 30, 2011, 09:09:23 pm

Thanks k if something comes up please contact me

Title: Re: parts
Post by: Hardo on October 03, 2011, 03:44:49 pm

Cheers Big K , PM Sent. I also am looking for a Fuel Tank for a 1980 / 1981 KX125 if anyone can help... 
 :)
-Hardo

Title: Re: parts
Post by: fatboyracing on October 04, 2011, 05:51:01 am

pm sent

Fatboy

Title: Re: parts
Post by: Hardo on October 10, 2011, 08:27:33 pm

Thankyou Big K ... I received the little frame bracket today.  ;D
That is perfect !  ;) :) ;)

Thankyou so very much. It is immensely appreciated.

 ;D

Title: Re: parts
Post by: Tossa on October 11, 2011, 11:20:37 am

Sorry forgot to thank you for the clutch cable, here in great time

cheers

Barry

Title: Re: parts
Post by: bigk on October 11, 2011, 04:25:55 pm

All good, happy to help.
Cheers,
K