OzVMX Forum

Marque Remarks => KTM => Topic started by: ozktm on August 21, 2011, 11:38:00 am

Title: 1981 495 Airbox Parts wanted
Post by: ozktm on August 21, 2011, 11:38:00 am

Guys,

I am chasing some parts as shown in the pic below.
i have an airbox but not the adapter piece and filter holder.
Can anyone help?

(http://i1089.photobucket.com/albums/i342/ozktm/495%20Rebuild/Airboxparts.jpg)

Title: Re: 1981 495 Airbox Parts wanted
Post by: Slakewell on August 21, 2011, 12:47:51 pm

If you get really stuck I can fab you one , are they same as the 250?

Title: Re: 1981 495 Airbox Parts wanted
Post by: ozktm on August 21, 2011, 01:48:08 pm

250 is a different box altogether.
need both parts 50 and 52.

250 box below:

(http://i1089.photobucket.com/albums/i342/ozktm/495%20Rebuild/IMGP7661.jpg)

495 Airbox Below :

(http://i1089.photobucket.com/albums/i342/ozktm/495%20Rebuild/IMGP7662.jpg)

Title: Re: 1981 495 Airbox Parts wanted
Post by: Slakewell on August 21, 2011, 03:31:12 pm

I can borrow some parts from Brad and copy them for you, Twin shock model?

Title: Re: 1981 495 Airbox Parts wanted
Post by: ozktm on August 21, 2011, 04:20:47 pm

Yep twin shock model.

Adrian

Title: Re: 1981 495 Airbox Parts wanted
Post by: Moto on August 21, 2011, 08:45:03 pm

Adrian  No 52 is a dense foam ring (ID of part 50 and OD of about +15mm and 10mm? thick)that goes under 50 and has to be thick enough to have to compress and seal between 50 and the airbox so the washer(54) and circlip(53) has pressure on it. I hope this makes sense !

Title: Re: 1981 495 Airbox Parts wanted
Post by: ozktm on August 22, 2011, 06:37:53 am

Part 50 is what i am after.