OzVMX Forum

Marque Remarks => Honda => Topic started by: smed on August 06, 2011, 10:49:28 pm

Title: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: smed on August 06, 2011, 10:49:28 pm: Just found on ebay, a U.K. listing for remade 1983 CR125 clutch sidecovers in aluminium,they look extremely well made,they are a bit exxy,but were else are we gonna get em, they say they will be doing other models also ;D ebay item # 250868919857
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: cyclegod on August 07, 2011, 12:13:20 am: http://www.ebay.com.au/itm/250868919857?ru=http%3A%2F%2Fshop.ebay.com.au%3A80%2F%3F_from%3DR40%26_trksid%3Dp3984.m570.l1313%26_nkw%3D250868919857%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: Davey Crocket on August 07, 2011, 10:13:01 am: It/they might be a bit exxy, but where you gonna get one?.....you need people like that to make parts to keep the bikes going.....if that was for a road racing bike, they would have sold as soon as he made them!!!...those boy's will pay whatever. The part looks awesome and would have taken alot of hours to make....quality=money. Good on him, and I hope he makes a few nicker out of it.
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: smed on August 07, 2011, 06:34:18 pm: Thanks for posting up the link CG, I will learn how to do it one day ;)
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: Hoony on August 07, 2011, 06:54:19 pm: i sent him an email for a 500 one. no answer as yet.
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: crs-and-rms on August 07, 2011, 07:55:19 pm: id get one if he ever made one for the 84 250
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: smed on August 07, 2011, 08:24:31 pm: Can you use the later 500 aluminium cover Hoonster like they can with the 85 on 250?
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: Hoony on August 07, 2011, 10:20:32 pm: Quote from: smed on August 07, 2011, 08:24:31 pm
Can you use the later 500 aluminium cover Hoonster like they can with the 85 on 250?

Good Thinking Smed, i just assumed they were all magnesium covers, this never even crossed my mind would you believe, talk about miss the obvious. ::)
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: 09.0 on August 13, 2011, 08:04:09 am: I don't think the 85 cover is the same. A bit later like 87 will accept the later alloy cover. I will be buying one when the 85 500 one is available. Thanks for the heads up that someone is making them. I reckon the next one on his to do list will be the 84 250.
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: Hoony on August 13, 2011, 08:15:30 am: have you tried Brad?

i know 85/86 are same and the crankcase deck for cylinder is 5mm higher on the 87' onwards compared to 85/86. i seem to think their was a water lines plumbing change in late 80's so your probably right. you better buy a RH, RJ & RK for future reference purposes ;)
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: oldyzman on August 13, 2011, 01:58:46 pm: Do the 88 and 89 cr250's have similar issues, does someone know when they did get better???
Cheers Brett
Title: Re: Perhaps an end to the dreaded CR magnesium waterpump rot
Post by: smed on August 13, 2011, 05:45:19 pm: I think from memory from what i have read on Marks swapmeet is that the 89 250 is the first of the aluminium covers that will retro fit back to 85 models,there are some other parts you must use from the later bike,cannot remember exactly what,but things like the impeller assy & the waterpump outer housing,an added bonus with the later cover is the quick access clutch cover,if you looked back through the posts on the swapmeet it's all there :)