OzVMX Forum

Marketplace => eBay Finds => Topic started by: ba-02-xr on August 05, 2011, 08:01:00 pm

Title: Deakin YZ250
Post by: ba-02-xr on August 05, 2011, 08:01:00 pm
http://www.ebay.com.au/itm/Yamaha-YZ250T-87-James-Deakin-Racer-VMX-AUS-WORKS-FACT-/110724694989?pt=AU_Motorcycles&hash=item19c7b4c3cd

What do you guys think
Title: Re: Deakin YZ250
Post by: Slakewell on August 05, 2011, 08:15:20 pm
If it's a real top ten bike were are the other bits? Period time would at least see a pro circuit barrel and pipe. Still for right money they were not a bad bike
Title: Re: Deakin YZ250
Post by: Nathan S on August 05, 2011, 08:37:37 pm
Its legit. I entertained buying it a few years back, before oldyzman got it - at that time, it was advertised as just an old dirt bike...

I'd still love to own it, but real life gets in the way sometimes...
Title: Re: Deakin YZ250
Post by: motomaniac on August 05, 2011, 10:02:58 pm
carby is out of period ,can't imagine JD used one of those.

Shock is WhitePower. price is reasonable .
Title: Re: Deakin YZ250
Post by: oldyzman on August 05, 2011, 10:10:41 pm
Thats right Motomaniac, Carby originally used on Deakins bike this was a VM Mikuni. I was going to change it to one but a friend of mine talked up the Flatside EI, it will still pass for Pre90...
Brett
Title: Re: Deakin YZ250
Post by: motomaniac on August 05, 2011, 10:14:26 pm
Thats right Motomaniac, Carby originally used on Deakins bike this was a VM Mikuni. I was going to change it to one but a friend of mine talked up the Flatside EI, it will still pass for Pre90...
Brett

The later flatslides of the 80's are much more advanced than those old El's , they belong on an Evo bike.
Title: Re: Deakin YZ250
Post by: IT400C on August 06, 2011, 01:04:12 am
Yeah, I used to own one of Peter Melton's Marlboro YZ250U's (his third bike for the year).

When I got it at the end of '88 it had only done the Canberra Supercross and a couple of practices.

But it also had none of the bling bits left on it either - just the ported barrel.

If it wasn't for the big "5"s on the numberplates and the remnants of Dayglo paint under the tank, you'd never have any idea that it was a Marlboro bike...

 ::)
Title: Re: Deakin YZ250
Post by: IT400C on August 06, 2011, 01:11:58 am
Wish I'd kept it, but when I later bought a new bike, there was no way I could afford to get the knew one without selling the old...    :'(

And don't forget, mid-late 80's was when dirt bike prices went through the roof - most guys were struggling to afford a new bike each year, let alone keep an old one as well!

Hopefully that old U is keeping a smile on somebody's face in Sydney still.

Last time I saw it, Mark Avards brother had borrowed it off the floor of Action Suzuki to ride a Cross Country on...   An 88 model YZ against a field full of 92-93 model bikes in the expert class and it still got the holeshot by a fair margin...   ;D
Title: Re: Deakin YZ250
Post by: oldyzman on August 06, 2011, 08:44:19 am
The deakin bike is missing the exp chamber, but the cylinder is legit and so is the muffler. Anyway whaterver,  lets see if it sells.
Brett
Title: Re: Deakin YZ250
Post by: Slakewell on August 06, 2011, 09:29:03 am
IMO it wouldn't be that hard to find on Ebay a Pro circuit barrel and pipe for it and with your skills John you could make it look as it did back in the day. The hard parts are on the bike. Buy it John it would look good in your shed.  ;D
Title: Re: Deakin YZ250
Post by: oldyzman on August 06, 2011, 01:46:37 pm
When i got this bike i was told by Geoff Holmes that the cylinder was stamped with JD, i have just looked and I can confirm it is...
Brett