OzVMX Forum

Clubroom => Tech Talk => Topic started by: Freakshow on August 05, 2011, 02:23:28 pm

Title: Cr125 shock seals
Post by: Freakshow on August 05, 2011, 02:23:28 pm

Can anyone point me in the direction of seals for the rear shocks on a 125 CR 74 ???   are the 250 seals the same ????

Anyway where do they come from, what else fits or where are the cheapest ones.

Title: Re: Cr125 shock seals
Post by: LWC82PE on August 05, 2011, 04:03:41 pm

There are 10 and 12mm shafts. I have only personally seen 10mm though. The 10mm seals are 10 x 25 x 9.5 and the body o-ring is 30.8 x 1.9. Other parts should be inspected and replaced if necessary too. Those sizes are from specs for CR250M but i think the ones i have got are 125 and use the same 10mm seals too.

Title: Re: Cr125 shock seals
Post by: Freakshow on August 05, 2011, 04:53:54 pm

OK and where the cheapest place for these seal ?? can you get them from SKF  shop ????

Title: Re: Cr125 shock seals
Post by: Freakshow on August 05, 2011, 04:55:57 pm

is the 9.5 the ID or the width ?

Title: Re: Cr125 shock seals
Post by: LWC82PE on August 05, 2011, 05:47:56 pm

Yes 9.5 is the thickness/height. OEM Honda part number is 91256-300-970 Im not sure if they are available new still. Otherwise yeah just try a SKF bearing dealer. You can get a head start and find the SKF number off their site. Its a little tricky to follow though, but if you can wait i will try and find it on the SKF site on the weekend, or just try Hoeys or one of the Elsinore parts specialists on the web.

Title: Re: Cr125 shock seals
Post by: dkupf on August 05, 2011, 06:29:21 pm

http://www.ebay.com.au/itm/1976-1977-CR125M-CR250-125-250-SHOCK-SEAL-KIT-ELSINORE-/230498117730?pt=Motorcycles_Parts_Accessories&hash=item35aac22862 I've used these on my 76 CR shocks and they worked well. Darcy