OzVMX Forum

Marketplace => For Sale => Topic started by: Nathan S on June 19, 2011, 10:12:46 pm

Title: Preston Petty No-Dive on Yamaha 38mm front end.
Post by: Nathan S on June 19, 2011, 10:12:46 pm

First up, I don't know what this is worth. Since I got it, I've been looking semi-regularly on Epay and I haven't seen any come up in the USA or Australia - so they're rare, at the very least... If you want 'em then make me a decent offer - if the whole set-up is only worth (say) $100, then I'll keep 'em...
I'm very close to Ebaying them, but thought I'd offer them here first.

I'm not 100% sure on what the forks are, but I'm pretty sure they're YZ250/400E. 38mm with ~10" of travel kinda has to be 250/400E, right? The fork boots kinda threw me, though. There's some rust between the triples, but the seal area seems very good. The photo of the rust shows the worst bits.
Everything else seems to be in good condition.
IT speedo drive included.

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/DSCN1931.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/DSCN1932.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/DSCN1933.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/DSCN1934.jpg)

(http://i46.photobucket.com/albums/f128/annaandnathan/Bikestuff/DSCN1935.jpg)

I can supply a front hub, if needed.

Nathan.
04000 23847

In Yass, in southern NSW.

Title: Re: Preston Petty No-Dive on Yamaha 38mm front end.
Post by: crossedup2 on June 19, 2011, 10:43:20 pm

Hi Nathan

PM sent.

Peter B