OzVMX Forum

Marketplace => Wanted => Topic started by: YZ250H on June 13, 2011, 01:30:27 pm

Title: Machinist in Perth (or somewhere around)
Post by: YZ250H on June 13, 2011, 01:30:27 pm

Hi Guys,
Thought I had done this before, but buggered if I can find the thread so ....
Need to get the following done and looking for some good operators :

Machine new steering head stem
Rebuild Crank
Rebuild Shock.

WA preferred, but failing that I can post things Australia wide.

Thanks in advance for any help.

Cheers

Title: Re: Machinist in Perth (or somewhere around)
Post by: Tossa on June 13, 2011, 02:18:14 pm

Dynotime, Russell Spaek 9409 5633,  - rebuild shocks out your way i think Wangarra MX and VMX tragic

Ray Easson Motorcycke engineering 9272 8466, club meember does great work

Title: Re: Machinist in Perth (or somewhere around)
Post by: YZ250H on June 13, 2011, 03:22:28 pm

Thanks Tossa - ever helpful as always.

Title: Re: Machinist in Perth (or somewhere around)
Post by: Rossvickicampbell on June 13, 2011, 03:32:07 pm

beat me this time T - I would also endorse both of those guys Tony  excellent work.  Ray is over Belmont way though.

cheers

Title: Re: Machinist in Perth (or somewhere around)
Post by: cyclegod on June 13, 2011, 03:34:37 pm

Ray is in Bayswater.

Title: Re: Machinist in Perth (or somewhere around)
Post by: Tossa on June 13, 2011, 03:35:00 pm

bloody foriegners, Ray is in Bayswater!!!

Title: Re: Machinist in Perth (or somewhere around)
Post by: YZ250H on June 13, 2011, 03:46:25 pm

Geez, that's nearly as far as CD8  ;D ;D ;D

Title: Re: Machinist in Perth (or somewhere around)
Post by: YZ250H on June 13, 2011, 03:48:02 pm

OK - while I have the attention of you blokes what is the best race meet to flag for VMXWA, or all they all good.

Title: Re: Machinist in Perth (or somewhere around)
Post by: Rossvickicampbell on June 13, 2011, 05:35:24 pm

OK - I was close - it started with a B!

Title: Re: Machinist in Perth (or somewhere around)
Post by: VMX247 on June 13, 2011, 05:50:55 pm

Quote from: YZ250H on June 13, 2011, 03:48:02 pm

OK - while I have the attention of you blokes what is the best race meet to flag for VMXWA, or all they all good.

Wandering is the closest drive distance to Perth !!  :P
the worst place for me would be on the hill at Narrogin, cause the wind is real lazy and goes right threw you  :-X
cheers A

Title: Re: Machinist in Perth (or somewhere around)
Post by: Tossa on June 13, 2011, 06:35:50 pm

anyone that doesn't have a cold wind or rain.  One of the coldest places in WA "Wandering"  if it's got a breeze your dead!!!lol

Title: Re: Machinist in Perth (or somewhere around)
Post by: HL500 on June 14, 2011, 03:52:06 pm

Quote from: Tossa on June 13, 2011, 02:18:14 pm

Dynotime, Russell Spaek 9409 5633,  - rebuild shocks out your way i think Wangarra MX and VMX tragic

Ray Easson Motorcycke engineering 9272 8466, club meember does great work

Just to clarify, Ray does the mechanical stuff.  Russell the shocks.  Ray has numerous phone calls to rebuild shocks.

Title: Re: Machinist in Perth (or somewhere around)
Post by: Tossa on June 14, 2011, 04:21:33 pm

Yep

Title: Re: Machinist in Perth (or somewhere around)
Post by: Rossvickicampbell on June 14, 2011, 04:47:58 pm

you would never volunteer to flag at Wandering - it is the one race meet of the year that you cannot miss being on a bike!!!

Title: Re: Machinist in Perth (or somewhere around)
Post by: HL500 on July 05, 2011, 12:18:25 pm

Quote from: Tossa on June 13, 2011, 02:18:14 pm

Dynotime, Russell Spaek 9409 5633,  - rebuild shocks out your way i think Wangarra MX and VMX tragic

Ray Easson Motorcycke engineering 9272 8466, club meember does great work

Just had my YZ465 rear shock reconditioned by Russell as well as shortened two ohlins by 20mm.  He did a great job.