OzVMX Forum

Marque Remarks => Suzuki => Topic started by: suzuki27 on June 02, 2011, 06:15:52 pm

Title: RM125B forks
Post by: suzuki27 on June 02, 2011, 06:15:52 pm

Can anyone tell me what the fork caps look like on RM125B forks. Have they got an air valve or just plain cap. Raised or countersunk/recessed cap etc. Thanks.

Title: Re: RM125B forks
Post by: bazza on June 02, 2011, 06:46:47 pm

look on e/bay or google a sales brochure?

Title: Re: RM125B forks
Post by: 090 on June 02, 2011, 07:37:50 pm

Hex on top with an air valve straight out of the centre.

Title: Re: RM125B forks
Post by: TM BILL on June 02, 2011, 07:54:40 pm

pretty sure 125B fork caps have the valves pointing out the front of the cap .

Title: Re: RM125B forks
Post by: D project on June 02, 2011, 08:06:44 pm

Yeah , pointing to the front as there is not much clearance between the bars and triple clamps. ;)

Title: Re: RM125B forks
Post by: Kane Mcguire on June 02, 2011, 08:14:01 pm

yeh i have a b according to frame number and the air caps are angled not verticle.

Title: Re: RM125B forks
Post by: JohnnyO on June 02, 2011, 09:18:28 pm

Yeah they point out to the front angled slightly upwards and have a flat section either side to put an open end spanner on.

Title: Re: RM125B forks
Post by: 090 on June 03, 2011, 06:47:45 am

Yeah good on me. At least I'm right about the fact we are talking about forks ::)...aren't we? I did describe my Yamaha forks in my Maico perfectly though  :-\ As Arnie would be saying a lot these days, I'm deeply sorry about that!

Title: Re: RM125B forks
Post by: suzuki27 on June 05, 2011, 02:27:00 pm

Thanks again gents.