OzVMX Forum

Marketplace => Wanted => Topic started by: tr3nt on June 01, 2011, 10:01:36 am

Title: 1980 RM/PE 250/400 Parts
Post by: tr3nt on June 01, 2011, 10:01:36 am

Chasing any 1980 RM/PE 250/400 Parts around the central qld area. The more parts I can gather up now the less I will need to track down later on. Reply in this topic to what you have.

Thanks, Trent

Title: Re: 1980 RM/PE 250/400 Parts
Post by: TM BILL on June 01, 2011, 11:33:13 am

Specifics ?

Title: Re: 1980 RM/PE 250/400 Parts
Post by: frostype400 on June 01, 2011, 11:47:17 am

PE and RM are different most parts which one do you have PE or RM or both. :)

Title: Re: 1980 RM/PE 250/400 Parts
Post by: tr3nt on June 01, 2011, 11:53:51 am

At the moment i have a complete running pe250 and a pretty complete rm250. plan is to put the pe engine in the rm so it is rideable while i try to source a proper rm250t engine. also have a rm400 frame/forks/swingarm and a pe400 frame/forks/engine so the plan is to make something out of that also until i can source a proper rm400 engine.

I was really just chasing anything in general but I will go home and compile a bit of a list to make things easier

Title: Re: 1980 RM/PE 250/400 Parts
Post by: rossco62 on June 02, 2011, 08:17:49 pm

Ive got a complete PE 400 in good running order that I want to sell.  I also have a few spare barrels, engine cases, cranks and clutch and gearbox parts if you are interested.

Title: Re: 1980 RM/PE 250/400 Parts
Post by: tr3nt on June 03, 2011, 08:34:01 am

sent you a message rossco

Title: Re: 1980 RM/PE 250/400 Parts
Post by: rossco62 on June 03, 2011, 07:50:26 pm

Got that Trent, Pic should be on their way