OzVMX Forum

Marketplace => Wanted => Topic started by: mxfool on May 23, 2011, 05:01:23 pm

Title: YZ 125 H sideplate needed
Post by: mxfool on May 23, 2011, 05:01:23 pm

Hi all
Does anyone have a right hand side plate for a YZ 125 H and also need a gear lever i you have one let me know
Thank you
mxfool  ;D

Title: Re: YZ 125 sideplate needed
Post by: YZ250H on May 23, 2011, 06:43:50 pm

How good does it have to be fool ?  Ha ha - I still laugh at talking like Mr T  ;D.
Gear levers on Ebay (original ones - well the individual parts are  ::)).  Depends what you're after.

Title: Re: YZ 125 sideplate needed
Post by: mxfool on May 23, 2011, 07:38:40 pm

Hi YZ250H
good to get a post from you again and i pity the fool who says differently, but really i need a side plate not broken and not to fussed on cosmetics as i can sand and sand if need be.
mxfool 

Title: Re: YZ 125 sideplate needed
Post by: YZ250H on May 24, 2011, 09:20:56 am

I'll have a look to see what I got.  I know I've got a couple of left hand ones - not sure about right hand.  I've got an NOS one, but you can't have that  ;D ;D
I'll do some trolling on ebay on the week-end for gear lever stuff.  Failing that you can get a dodgy MDS one from your local bike shop  ;)

Title: Re: YZ 125 sideplate needed
Post by: YZ250H on June 03, 2011, 08:50:10 pm

Gear Lever.

http://www.ebay.com.au/itm/YAMAHA-YZ125H-1981-SHIFT-PEDAL-NOS-OEM-/120144327383?pt=Motorcycles_Parts_Accessories&hash=item1bf928f2d7#ht_778wt_1139

Sticky out bit  ::)
http://www.ebay.com.au/itm/NOS-YAMAHA-IT250-TT250-YZ125-YZ250-YZ465-SHIFT-PEDAL-/190472525743?pt=Motorcycles_Parts_Accessories&hash=item2c590c17af#ht_687wt_905

Rubber bit
http://www.ebay.com.au/itm/NOS-Yamaha-YZ125-YZ250-YZ465-TT500-Shift-Pedal-Cover-/150449204515?pt=Motorcycles_Parts_Accessories&hash=item230778ad23#ht_500wt_922

Sproing
http://www.ebay.com.au/itm/Yamaha-NOS-Spring-shift-lever-IT175-IT250-IT465-YZ250-/170590824725?pt=Motorcycles_Parts_Accessories&hash=item27b8016915#ht_500wt_922

Just bung a 6mm bolt in the other end and you've got the real McCoy  ;)  The Rivet thing is a bit of a bugger to sort out.  I made a ham fisted effort on the 250, but it doesn't look to bad.  Just be sure to set it at the right angle  ::) ;D

Will check what side covers I've got this week-end as I've got to dig out the crank for Rossco as well.

Title: Re: YZ 125 sideplate needed
Post by: mxfool on June 03, 2011, 10:31:11 pm

thanks YZ250H i really appreciate the work involved but the wife loosened the purse strings and got a new gear lever not nos but beats changing gears with a pair of pliers  ;D mr t  ;D

mxfool

Title: Re: YZ 125 sideplate needed
Post by: YZ250H on June 03, 2011, 11:04:43 pm

No worries Bud.  The parts are usually around  ;)

Title: Re: YZ 125 sideplate needed
Post by: YZ250H on June 04, 2011, 12:28:45 pm

Sorry mate.  Had a look for the side covers and I've only got a left one (and it isn't very good).
Have you thought about DC plastics ??
Otherwise you are back to eBay  :-\

Title: Re: YZ 125 sideplate needed
Post by: mxfool on June 04, 2011, 01:01:17 pm

HI ya YZ250H thanks for trying i have had a look around every ebay and googled every lead, but i have already brought a rear guard from dc plastics  for my PE and i don't want one THAT bad.  :'(

mxfool

Title: Re: YZ 125 sideplate needed
Post by: YZ250H on June 04, 2011, 08:24:23 pm

I'm hearing you brother  ;)