OzVMX Forum

Marketplace => Wanted => Topic started by: firko on May 21, 2011, 10:03:43 pm

Title: Suzuki TM400 CDI ignition.
Post by: firko on May 21, 2011, 10:03:43 pm

I was prepping my Boyd and Stellings TM400 for CD8 today and at first things looked good..strong spark, plenty of compression and fuel. The old girl started easily and sounded like the real deal. Happy with that I went back to working on the Hindall for a while until a mate came over who wanted to hear the Suzuki run.
Sadly......You guessed it, there was no spark..or a very weak, spasmodic spark at best. I tried everything from my book of instant fixes but still no spark.
Because of the short time factor between now and CD8 blast off, I'm asking if anyone has a complete TM400 CDI ignition they'd like to sell me. Failing that, a top coil and black box might get me out of the shite. a

One question for the brains trust....Would a Yamaha CDI coil work on the Suzuki ignition? Does anyone have any suggestions?

Title: Re: Suzuki TM400 CDI ignition.
Post by: Lozza on May 21, 2011, 11:56:50 pm

A PE 175 cdi apparently works

Title: Re: Suzuki TM400 CDI ignition.
Post by: Davey Crocket on May 21, 2011, 11:59:10 pm

Mate, sent the whole kit and caboodle to Small Coil Rewinds in Melborne...ph 03-52788454....I've got 2 there at the moment.....send coil, CDI box, stator plate, flywheel and the wiring and they test run the whole lot....last one cost under $200 and turn around time a couple of days....sent it in a overnight bag....$14 from Brissy......plenty of time.....now go make your mum a nice cuppa.

Title: Re: Suzuki TM400 CDI ignition.
Post by: firko on May 22, 2011, 10:40:39 pm

bump

Title: Re: Suzuki TM400 CDI ignition.
Post by: southnztim on May 23, 2011, 03:17:38 pm

I don't know if its any good to you, theres a TS 400 CDI on Trade Me at the moment.
http://www.trademe.co.nz/Trade-Me-Motors/Motorbikes/Parts-for-sale/Electrics/auction-378561862.htm

Title: Re: Suzuki TM400 CDI ignition.
Post by: firko on May 23, 2011, 04:08:55 pm

Thanks Tim....I've puta bid in.

Title: Re: Suzuki TM400 CDI ignition.
Post by: bazza on May 23, 2011, 04:49:51 pm

let me know firko and ill bring it over if sent to cast a de Maico

Title: Re: Suzuki TM400 CDI ignition.
Post by: stuyvo on May 24, 2011, 08:07:47 am

the bike wrecker at Penrith might be able to help you out; they just started parting out a TS 400 on ebay

Title: Re: Suzuki TM400 CDI ignition.
Post by: roy dale on May 25, 2011, 03:02:33 pm

Hi mate
do you have a part # on the CDI i may have one
[email protected]  or 0410644974  roy

Title: Re: Suzuki TM400 CDI ignition.
Post by: Freakshow on May 27, 2011, 10:56:47 am

i have a PE175/250b IGNITION, FLYWHEEL, STATOR AND BOX.

Title: Re: Suzuki TM400 CDI ignition.
Post by: Freakshow on May 27, 2011, 11:52:50 am

Consider sending you the CDI in a strainght swap for a working TIA06 yamaha one. ( which is what i have issue with ATM............. its stop sparking.