OzVMX Forum

Clubroom => Tech Talk => Topic started by: Colin Jay on May 08, 2011, 01:08:14 pm

Title: Fuel tap - Vesco tank
Post by: Colin Jay on May 08, 2011, 01:08:14 pm

I want to refit a Vesco 15l plastic tank to my '78 Husky 390AMX to get a longer fuel range for an enduro. Does anyone know where I can get a fuel tap and the require rubber bung from? Preferably in Aust.

CJ

Title: Re: Fuel tap - Vesco tank
Post by: LWC82PE on May 08, 2011, 02:55:51 pm

All the Vescos i have seen have 2 bolt flange taps. If yours has the single hole for rubber bung then

see here

http://ozvmx.com/community/index.php?topic=5514.0

also

Canam uses the same set up
scroll down page here
http://www.rtrmoto.com/


sorry i dont know where in Australia to get this stuff

Title: Re: Fuel tap - Vesco tank
Post by: TT5 Matt on May 08, 2011, 11:11:06 pm

Slob
malcom smith tanks have that groment type setup and pretty sure ive seen that setup on lawn mowers maybe even ride ons so might be worth going down to your local mower shop and asking them

b.basham

Title: Re: Fuel tap - Vesco tank
Post by: Colin Jay on May 09, 2011, 07:53:30 am

I stand corrected, I found the tank (burried in a dark corner of the shed) and it is actually a Malcom Smith tank not a Vesco. I will give some of the mower joints a go.

CJ

Title: Re: Fuel tap - Vesco tank
Post by: Canam370 on May 09, 2011, 08:35:46 am

Canam uses the same set up
scroll down page here
http://www.rtrmoto.com/


sorry i dont know where in Australia to get this stuff



 Bert Flood Imports in Lilydale can help with these taps and grommets