OzVMX Forum

Marque Remarks => Suzuki => Topic started by: Stankflapper on April 12, 2011, 07:38:02 am

Title: Advise needed
Post by: Stankflapper on April 12, 2011, 07:38:02 am

I have stripped my 1983 RM500 and during my reassembly I have these two washers one with a metal insert, that I am lost as to their positioning on the bike. Can anyone advise of where they need to be installed?
(http://i72.photobucket.com/albums/i168/bigmacca99/DSC00093.jpg)
(http://i72.photobucket.com/albums/i168/bigmacca99/DSC00094-1.jpg)

Title: Re: Advise needed
Post by: SAABCOMBI on April 12, 2011, 08:09:39 am

they look like linkage dust covers or the spaciers for the wing arm where the engine mounting point. ???

Title: Re: Advise needed
Post by: Lozza on April 12, 2011, 08:14:35 am

The old rule is "if they are left over after a rebuild they were not needed to begin with"  ;D

Title: Re: Advise needed
Post by: RM500man on April 12, 2011, 08:17:13 am

Hi Mate,they are the rear wheel spacers,the larger one with the metal insert goes on the left hand side of the wheel-between the wheel bearing and the inside of the swingarm as you look at it from the back of the bike and the other one goes on the right hand side, on the outside of the backing plate.

Cheers

Title: Re: Advise needed
Post by: Slakewell on April 12, 2011, 08:18:22 am

Remove the shock and feel how it works.

Title: Re: Advise needed
Post by: Stankflapper on April 12, 2011, 08:25:31 am

Quote from: RM500man on April 12, 2011, 08:17:13 am

Hi Mate,they are the rear wheel spacers,the larger one with the metal insert goes on the left hand side of the wheel-between the wheel bearing and the inside of the swingarm as you look at it from the back of the bike and the other one goes on the right hand side, on the outside of the backing plate.

Cheers

Thanks mate.

Title: Re: Advise needed
Post by: Stankflapper on April 12, 2011, 08:35:53 am

Just to clarify, they are part 19 and 20?
(http://i72.photobucket.com/albums/i168/bigmacca99/DP023199.png)

Title: Re: Advise needed
Post by: RM500man on April 12, 2011, 09:36:55 am

Yes indeed mate.