OzVMX Forum

Marketplace => Wanted => Topic started by: Freakshow on February 10, 2011, 04:40:02 pm

Title: Looking for the following bits and peices
Post by: Freakshow on February 10, 2011, 04:40:02 pm

ok shopping list so far :  cna be used but must be usable !

KE 125 A+ up pipe
23" front trials or speedway tyre
grasstrack rear fender
grasstrack seat or speedway banna seat
18" 36 hole alloy rim to suit drum brake in the brissy or similar area.
Rear spokes to fit KX125 hub ???
Where do you get the rubber bands for the speedway forks JIm ?

Title: Re: Looking for the following bits and peices
Post by: jimg1au on February 10, 2011, 05:22:16 pm

antig in england thats were i get mine from do you want me to send you a cattledog of there stuff.no web page just emails and phone calls.
i have seen 2 valve jawas seats on uk ebay
ask some of your local speedway riders as the fork rubber on modern bikes is the same as on old hagons they also should tell you a tryer supplier here in aus
as for the rear fender match mick makes them new i would go for the elstar design myself.when i build my honda 350 longtrack bike thats what i will be putting on
jim

Title: Re: Looking for the following bits and peices
Post by: Freakshow on February 11, 2011, 12:26:01 am

MAtcho can you give me the specs for that rear guard, so i can get someone to check the space avail.  cheers

Title: Re: Looking for the following bits and peices
Post by: ian on February 11, 2011, 04:31:54 pm

chris barton racing ph/fax 0353682836 mobile 0414938048  he's in vic good to deal with. or uk .

Title: Re: Looking for the following bits and peices
Post by: Hoony on February 11, 2011, 04:39:39 pm

some handy contacts

http://www.speedwaybikeaustralia.com/index.html

Title: Re: Looking for the following bits and peices
Post by: matcho mick on February 11, 2011, 11:25:08 pm

Quote from: Freakshow on February 11, 2011, 12:26:01 am

MAtcho can you give me the specs for that rear guard, so i can get someone to check the space avail.  cheers

freaky, elstars approx 700 long in the arc,150 wide at the back ,larger longtracks 900,150 wide, :P

Title: Re: Looking for the following bits and peices
Post by: Freakshow on February 14, 2011, 10:43:43 am

any one have a good KE125 exhaust..... ????

Title: Re: Looking for the following bits and peices
Post by: Freakshow on February 15, 2011, 12:24:21 pm

Any one up in brissy able to lace in a rear wheel for us ? have the rim and spokes up ther so far just sussing out a alloy rim.

Title: Re: Looking for the following bits and peices
Post by: Freakshow on February 21, 2011, 02:16:44 pm

need a 18" rim suit drum brake

Title: Re: Looking for the following bits and peices
Post by: EML on February 22, 2011, 05:02:17 pm

Freaky, try tyres 4 bikes on 3262 4377 or John Titman but I don't know his number. There is also Ashes Spokes who is always at CD but I only have his no. at home.

Title: Re: Looking for the following bits and peices
Post by: Freakshow on February 22, 2011, 05:20:40 pm

Quote from: matcho mick on February 11, 2011, 11:25:08 pm

Quote from: Freakshow on February 11, 2011, 12:26:01 am

MAtcho can you give me the specs for that rear guard, so i can get someone to check the space avail.  cheers

freaky, elstars approx 700 long in the arc,150 wide at the back ,larger longtracks 900,150 wide, :P

not sure of the width but the depth are.....  http://ozvmx.com/community/index.php?topic=17573.new#new