OzVMX Forum

Marque Remarks => Suzuki => Topic started by: ranchak on January 27, 2011, 03:14:52 am

Title: RM400 .75mm Piston Kits
Post by: ranchak on January 27, 2011, 03:14:52 am

Well guys I think I am going to move forward with the .75mm piston kits. Who is still interested? Thanks, Ron

Title: Re: .75mm Piston Kits
Post by: LWC82PE on January 27, 2011, 08:43:23 am

What model? RM500?

Title: Re: RM400 .75mm Piston Kits
Post by: ranchak on January 27, 2011, 01:53:02 pm

Thanks Leith, I guess when your tired you forget the obvious

Title: Re: RM400 .75mm Piston Kits
Post by: DR on January 27, 2011, 06:46:16 pm

Count me in thanks Ron ;)

Title: Re: RM400 .75mm Piston Kits
Post by: LWC82PE on January 27, 2011, 07:12:34 pm

Before you get too deep into this, Rick Horvat in USA gets Wiseco to make batches of RM400 pistons. Well i know he was a while ago.

Title: Re: RM400 .75mm Piston Kits
Post by: DR on January 27, 2011, 09:21:16 pm

He may Leith but so far as I know he does not have them in stock ready to buy and it's a long wait if he doesn't. I'd much prefer an oversize in the original piston style also not a wiseco copy ;) Regardless Ron, if you do go ahead count me in for 1 kit and probably an extra ring. With the limited amount of ride time the old 400 does these days that should see out my days :D

Title: Re: RM400 .75mm Piston Kits
Post by: LWC82PE on January 27, 2011, 09:33:56 pm

Yep ok, just wanted to make him aware of another supplier, wouldn't want to end up with pistons you cant sell but if Rick is all to hard to deal with then certainly another supplier would be welcome to take his place :) By the way, what ive heard/read they are not 'wiseco copies' but actually genuine wisecos he has had them specially make. He has had RM370 pistons in the past aswell.

Title: Re: RM400 .75mm Piston Kits
Post by: DR on January 27, 2011, 09:47:29 pm

I don't feel 0.75 over RM400 pistons would be hard to sell as they fit all models and I've honestly not seen anyone advertising them. Do the research obviously but long term it would be comparable to PE400 sales, if advertised possibly even better unless someone else jumps in on the bandwagon ;)

Title: Re: RM400 .75mm Piston Kits
Post by: burty400 on January 28, 2011, 09:55:26 am

Hi Ron,
You can put me down for 2    .75mm piston kits and 2 spare rings also.
Thanks Dean

Title: Re: RM400 .75mm Piston Kits
Post by: seego on January 28, 2011, 01:30:29 pm

Hi Ron are you looking for a rm500 rod still?

Title: Re: RM400 .75mm Piston Kits
Post by: ranchak on January 29, 2011, 03:44:51 am

Quote from: seego on January 28, 2011, 01:30:29 pm

Hi Ron are you looking for a rm500 rod still?

Yes I am. Do you have one?

Title: Re: RM400 .75mm Piston Kits
Post by: ranchak on January 29, 2011, 03:45:12 am

Quote from: Doc on January 27, 2011, 06:46:16 pm

Count me in thanks Ron ;)

Doc, thanks, Ron

Title: Re: RM400 .75mm Piston Kits
Post by: ranchak on January 29, 2011, 03:45:44 am

Quote from: suzuki763 on January 28, 2011, 09:55:26 am

Hi Ron,
You can put me down for 2    .75mm piston kits and 2 spare rings also.
Thanks Dean

Dean, thanks, Ron

Title: Re: RM400 .75mm Piston Kits
Post by: seego on January 30, 2011, 05:40:26 pm

yes Ron

Title: Re: RM400 .75mm Piston Kits
Post by: ranchak on January 30, 2011, 05:44:12 pm

seego, do you have a rod or a crank? Where are you located? Thanks, Ron

Title: Re: RM400 .75mm Piston Kits
Post by: seego on January 30, 2011, 05:52:56 pm

sent you an email a few minutes ago mate ;)

Title: Re: RM400 .75mm Piston Kits
Post by: ranchak on February 03, 2011, 03:24:10 pm

OK Guys I just ordered the .75mm Oversize kits. They should be in around the end of February.