OzVMX Forum

Marketplace => Wanted => Topic started by: YZ250H on January 21, 2011, 09:18:04 pm

Title: YZ50 G/H Carby
Post by: YZ250H on January 21, 2011, 09:18:04 pm

After Dave Mac did a great job of blasting the outer of my YZ50 carby Australia post lost the farking thing  >:( >:( >:( >:(
I still have the guts of it, but the rest is gooooone.
Nothing on ebay that I can see.  The last part of the resto  >:( >:(
Anyone got one ???

Cheers

Title: Re: YZ50 G/H Carby
Post by: 090 on January 21, 2011, 10:00:21 pm

I have quite a few small mikuni's but I don't know what I'm looking for. Any idea's?

Title: Re: YZ50 G/H Carby
Post by: YZ250H on January 21, 2011, 10:18:12 pm

I'll come back with some photos Brad  ;)

Title: Re: YZ50 G/H Carby
Post by: YZ250H on January 22, 2011, 12:18:47 pm

Here you go Brad
Do these help ?

(http://i202.photobucket.com/albums/aa49/tbarsby/51c4_1.jpg)
(http://i202.photobucket.com/albums/aa49/tbarsby/bikepics-1612730-full.jpg)

Title: Re: YZ50 G/H Carby
Post by: 090 on January 23, 2011, 11:53:18 am

This looks like the one. The idle and mixture screws are missing but I have heaps of mikunis to raid from. I might have a choke knob as well.
Any good?

(http://i1199.photobucket.com/albums/aa474/090bvb/tonycarbie003.jpg)

(http://i1199.photobucket.com/albums/aa474/090bvb/tonycarbie002.jpg)

(http://i1199.photobucket.com/albums/aa474/090bvb/tonycarbie001.jpg)

Title: Re: YZ50 G/H Carby
Post by: YZ250H on January 23, 2011, 02:36:59 pm

It does look like that one 8).  I still have all the internals as I stripped the carb before sending to Dave Mac - so jets, slide etc are no dramas.  I have bought a new choke know as the old one was a bit mangled.  Also got some new rubbers for the top and the choke plunger.  I think there is a choke plunger on ebay at the moment.  I'm sure I can track down and idle and mixture screw from Mr Yamaha or ebay.

PM me with a price Brad and it's sold mate.  Thanks so much for taking the time to look for it - much appreciated.  I'll even throw in a beer at CD8  ;)

Title: Re: YZ50 G/H Carby
Post by: YZ250H on January 24, 2011, 11:42:29 pm

Found one boys - stop looking - Thanks everybody  8) 8)

Title: Re: YZ50 G/H Carby
Post by: YZ250H on February 13, 2011, 11:42:48 am

Sooooo........  The one on the photo has 23mm slide and the original is 27.5.  Can I still use the one in the photos or am I going to have trouble getting the jetting right ??

Brad - got another one the same with 27.5mm slide ??

It's turning into a saga  ;D

Title: Re: YZ50 G/H Carby
Post by: mainline on February 13, 2011, 11:57:10 am

Yeah, you'd want to get the jetting right, otherwise you'll struggle trying to clear Drunk's Hill

Title: Re: YZ50 G/H Carby
Post by: YZ250H on February 13, 2011, 12:24:21 pm

Yeah, I'm assuming the right size jets in the wrong carby will be alllll wrooong.
As far as drunks hill goes - it's all in the run-up I'm told  ;D

Title: Re: YZ50 G/H Carby
Post by: YZ250H on February 18, 2011, 10:10:32 pm

The best I can find is a used one at S and S for 132.50 US  :o :o :o :o
There has got to be one out there somewhere  :-\ :-\ :-\

Title: Re: YZ50 G/H Carby
Post by: YZ250H on March 12, 2011, 06:42:22 pm

Stop looking everyone  ::)
For other people that might be in a similar fix - I bought a new one that looks identical from HAdtricks in Townsville for $125.  Also found an exhaust guard, so I can die a happy man  ;D ;D ;D