OzVMX Forum

Marketplace => Wanted => Topic started by: DR on January 15, 2011, 11:11:26 pm

Title: '82-'85 RM80 parts required for project..RM80D
Post by: DR on January 15, 2011, 11:11:26 pm
Looking for an exhaust from an '83-'85 RM80D/E/F
A magneto cover from '82-'85 Z/D/E or F model
A cylinder head for an '83-'85
and an inlet manifold for an '82-'85

think that's all but probably not ::)

(http://boospq.bay.livefilestore.com/y1pIH8HL9x4Ap7FQQtzRAZfBuvu5UCLhmO_3wmQUt_QfZkYwqgar7UFURkmoKVDcVUPsBODK23fvCL_z2MBUHWGq3yVkxKPuRKG/rm80d%2015th%20jan%2011%20001.jpg?psid=1)

An '82 exhaust would possibly go close also if you have one of those kicking around excess to your needs. Cheers
Title: Re: '82-'85 RM80 parts required for project..RM80D
Post by: whitey 43 on January 17, 2011, 09:12:18 pm
Hey Doc, I havnt got any bits, but I had A '81,'84,'85 &'86 model...Loved the '85.Keep us updated on your progress.There is A cheap cylinder on evilbay U.S that looks O.K
Title: Re: '82-'85 RM80 parts required for project..RM80D
Post by: monaro308 on January 17, 2011, 10:29:08 pm
Which bike is that Doc?
Not the one you got last week?
Boy you don't muck around if it is  ;D
Title: Re: '82-'85 RM80 parts required for project..RM80D
Post by: DR on January 18, 2011, 06:20:01 pm
sorry, I couldn't get to the forum for the last day or so. Whitey, I kinda wanted an '85 but this '83 basically landed in my lap less the engine, pipe and carb :) Mario has the bottom end and Luke flung me a cylinder. If anything the only real mod I 'might' do after is fit a later model front end with the disc brake if I can find one. I wanted a blue frame/seat to match the new tank cover (can be seen on the shelf looking above the front  numberplate) but other than the personal colour changes it'll remain stock. Probably look pox but I'll try it and see :D Did you ever do anything with that 90ish RM250?

Mario yup, same bike ;) things have slowed the last few days due to work but it's cleaning up nicely eh ;D The engine parts needed to complete the motor may well be coming from a very helpful generous forum member and when complete will be the result of a combined effort of 4 or more members. Saved another one! ;)
Title: Re: '82-'85 RM80 parts required for project..RM80D
Post by: monaro308 on January 18, 2011, 09:55:04 pm
That will come up looking a treat Chris!
I need to pull my finger out and drop into Austpost and get a cost for you when i find a box for it and drain the oil.

Title: Re: '82-'85 RM80 parts required for project..RM80D
Post by: DR on January 18, 2011, 09:58:39 pm
tanks Mario..no hurry for the post mate..too busy, too hot and feeling too bloody old and worn out to do much with the bikes in the short term..think I need to go take a pill..have to do it all again tomorrow ::)
Title: Re: '82-'85 RM80 parts required for project..RM80D
Post by: whitey 43 on January 19, 2011, 05:17:24 pm
Hey Doc, nah,I ended up wheeling it out the back so i had more room...Ended up selling it for $300. I do want another one now im moving to A bigger shed (House is o.k too-so my wife says!).Do you want A suzuki front disc, or any will do? I may have A KX complete front floating around...
Title: Re: '82-'85 RM80 parts required for project..RM80D
Post by: DR on January 20, 2011, 10:42:54 pm
Cheers, PM sent ;) pretty sure KX80's used Kayaba's also Whitey. Probably much the same fork only for caliper mounts on the lowers ;)..hopefully :P