OzVMX Forum

Clubroom => Tech Talk => Topic started by: maxi81 on January 07, 2011, 02:23:27 pm

Title: crankshaft rebuilders
Post by: maxi81 on January 07, 2011, 02:23:27 pm

Does anyone know of a good place to go to get a crankshaft rebuilt for a RM 400T. I was told Serco in Wooloongabba. Has anyone had any experiences with them?

Thanks

Title: Re: crankshaft rebuilders
Post by: pmc57 on January 07, 2011, 03:58:03 pm

SERCO can and will do the crank rebuild, they checked and trued one of my RM250A cranks. Talk to Alan Hoekwater Ph 3362 6600

Title: Re: crankshaft rebuilders
Post by: maxi81 on January 07, 2011, 04:40:56 pm

Thanks for that

Title: Re: crankshaft rebuilders
Post by: evo550 on January 07, 2011, 04:43:01 pm

Yep, Serco's the go. I don't know of anyone else in brisvegas that does, you could take it to a shop, but they just send it on to Serco anyway.
Alan's great.

Title: Re: crankshaft rebuilders
Post by: Davey Crocket on January 07, 2011, 05:12:57 pm

Ring this bloke.....far better job than Serco...0414239930....works from home....plus if your in the know there are 2 other engine guys in Brisbane. ;)

Title: Re: crankshaft rebuilders
Post by: Bamford#69 on January 07, 2011, 06:00:48 pm

Hi,
Al at Serco, Deshon st Buranda,has rebuilt 6 cranks for me ,also resleeved, and bored more than 6 barrels   never had an issue with them.
cheers

Title: Re: crankshaft rebuilders
Post by: DR on January 07, 2011, 06:58:31 pm

on the northside Craig Lott can do the deed. Not sure if the case is still so but he was doing much of Team Moto's work..cranks done in shop, boring is outsourced to another guy at Caboolture who also knows the aircooled stuff ;)

http://northsidemotorcyclecentre.com/Home_Page_7ANH.php (http://northsidemotorcyclecentre.com/Home_Page_7ANH.php)

Title: Re: crankshaft rebuilders
Post by: holeshot buddy on January 07, 2011, 07:31:39 pm

what doc said is right
i have also been using AL at serco for years
done shitloads of cranks sleeves and pistonsnever an issue all tollerances spot on
would highly recommend him
tell him rusty sent you ;)

Title: Re: crankshaft rebuilders
Post by: sa63 on January 08, 2011, 09:29:19 am

Paul Eickelberg in Caboolture does a great job on bores, cranks and general machining. Ex german GP racer, very particular..